Mugen mtx4 shocks
#1
Tech Initiate
Thread Starter
Join Date: Jan 2011
Location: Wombwell, Barnsley ,South Yorkshire, England
Posts: 45
Mugen mtx4 shocks
Hi could anyone advise me what oil to use in my mtx4 shocks? I currently don't know what I have in, but I am sure they need topping up soon and don't know what oil to replace, thanks - James
#2
Stock set-up was 600 I believe.
#3
Tech Elite
iTrader: (2)
also depends on what pistons you have and how its handling your track conditions
500-600 is about right with most smoother tracks and i like to use the 1.3mm pistons in hte fromt or 2 hole pistons to give more turn in.
you could also try a little lighter oil in the front for the same reason
500-600 is about right with most smoother tracks and i like to use the 1.3mm pistons in hte fromt or 2 hole pistons to give more turn in.
you could also try a little lighter oil in the front for the same reason
#4
Tech Initiate
Thread Starter
Join Date: Jan 2011
Location: Wombwell, Barnsley ,South Yorkshire, England
Posts: 45
Cheers I have the standard pistons in, don know what they are exactly you would probably know, for dry I would go harder than wet I guess.
Cheers,
James
Cheers,
James
#5
STOCK
Try 600wt mugen as a starting point