Capricorn LAB C801 1/8 scale
#16
Here you imply that using a "special" aluminum, gives a stiffer car.
Ofcourse that aint true, it`s my kind off humor to point at that.
Some say it`s arrogant, i think it`s fun..
Once had a discussion with people about a Shephard chassis,
it claims to have a stiffer aluminum.....:
http://www.redrc.net/2010/10/shepher...chassis-plate/
Ofcourse that aint true, it`s my kind off humor to point at that.
Some say it`s arrogant, i think it`s fun..
Once had a discussion with people about a Shephard chassis,
it claims to have a stiffer aluminum.....:
http://www.redrc.net/2010/10/shepher...chassis-plate/
#17
Tech Regular
#18
Some new Pictures of the LAB C801
You can see the rear camber adjustment system. With this system you can change the rear camber with a hex driver, just like you're used of doing at the front. This makes it possible to dial in that all important rear camber setting with just a quick stop in the pits.
Also you can see the carbon arms for the steering blocks, this makes the steering blocks the same for both sides so less investments in spare parts.
You can see the rear camber adjustment system. With this system you can change the rear camber with a hex driver, just like you're used of doing at the front. This makes it possible to dial in that all important rear camber setting with just a quick stop in the pits.
Also you can see the carbon arms for the steering blocks, this makes the steering blocks the same for both sides so less investments in spare parts.
#20
Tech Adept
new Top Driver for Capricorn 1\8
http://www.redrc.net/2011/01/dario-b...in-18th-scale/
new driver for Capricorn C-801
new driver for Capricorn C-801
#22
Just FYI, not all "Ergal" is 7075. It's a brand name for the 70xx series of aluminum so grades like 7020 and 7050 could also be called "Ergal". Of course, 7075 being the king, it's almost always 7075. Not arguing, just informing. Looks like a wicked ride.
#23
Tech Regular
Just like Fortal and all others, the only thing they all have in common, is the 70.000 MPa.
That`s all
#24
New images from Capricorn:
#25
I see quick release now and a lower rear arb , very nice now its only missing a front arb with ball bearings in stead of the blades.
Like candy to a child
Like candy to a child
#27
Quick question about hubs: are they the same hard light for mugen / velox, or not?
grazie
grazie
#29
What does it take to get a factory deal if i do the promo series
See ya , Greetz JW