Barco racing

i need a PISTON SLEEVE for a rb c5 onroad or a semi used Ninja onroad can some one help me

Roelof

The RB C5 is a Novarossi made engine so most P/S sets from Novarossi will fit. You can take a look to sets from the N21-7T or the Kangaroo, be sure the upper edge on the sleeve is 2mm thick, most new (9 port) sets have a 3mm edge but with the right buttonhead it must fit as well.

Rick Davis

Before you order anything check the index pin at the top of the sleeve - if memory serves correctly the RB's (over the time I ran them) had the index pin on the exhaust side and Nova's seem to be intake side. Solution is to pull the pin or dremel a new slot.

Roelof

True, but that is a minor detail. It is easy to make a small cut on the other side of the sleeve.

mugenize1

iTrader: (-1)

I have a Sleeve for the GRP On-Road that will fit the Mugen Ninja MR21-R01 as well it has 7 Tanks ONLY. I also have the Crankshft and the carb for the Ninja.