engine loading up help please
 

im running a orion wasp .12 with the updated carbs the engine runs great but when i refuel or it sits for a sec it loads up and takes a few to clear out. im running odonnel 30% and os P3 plugs. any help is appreciated

loading up
 

i would lean out the bottom neddle sounds like its rich

what he said

lean it out 1/12 of a turn

yep what they said im running the same motor same fuel but the rp6 plugs i was havein the same prob just lean the low speed till it screams of the line after 5 or 6 sec of idle then richen the high speed if your temps get to high