Servos - for the On-Road Nitro cars...
#1
Servos - for the On-Road Nitro cars...
So, for the past week I have been searching for any information regarding servos for any 1/10 on-road nitro car.
I am in need to purchase new servos soon, and I would like an opinion on the following.
For Throttle / Brake
Specifications:
Torque: 142 oz/in (@6.0V)
Speed: .17 sec/60° (@6.0V)
Dimensions (WxLxH): 1.55x0.73x1.46 in
Weight: 1.60oz
Bearing: Single
Motor Type: Cored
Gears: Metal
For Steering
* Transit time: 0.13 sec/deg @ 6V
* Torque: 12.5 kg/cm (173.6 oz/in) @ 6V
* Weight: 66g (2.328 oz)
* Length: 41.8mm
* Width: 20.6mm
* Height: 39.6mm
Info taken from www.amainhobbies.com
All in all it comes to $130 aprox. Would these servos be a right choice for parking lot racing, and maybe a few permanent track races?
Any other advise or choice regarding servos for any nitro on-road car?
I am in need to purchase new servos soon, and I would like an opinion on the following.
For Throttle / Brake
Specifications:
Torque: 142 oz/in (@6.0V)
Speed: .17 sec/60° (@6.0V)
Dimensions (WxLxH): 1.55x0.73x1.46 in
Weight: 1.60oz
Bearing: Single
Motor Type: Cored
Gears: Metal
For Steering
* Transit time: 0.13 sec/deg @ 6V
* Torque: 12.5 kg/cm (173.6 oz/in) @ 6V
* Weight: 66g (2.328 oz)
* Length: 41.8mm
* Width: 20.6mm
* Height: 39.6mm
Info taken from www.amainhobbies.com
All in all it comes to $130 aprox. Would these servos be a right choice for parking lot racing, and maybe a few permanent track races?
Any other advise or choice regarding servos for any nitro on-road car?
#2
Tech Regular
iTrader: (3)
For parking lot racing/bashing, two of these is all you need. $55 bucks a piece
http://www.amainhobbies.com/product_...tal-Gear-Servo
http://www.amainhobbies.com/product_...tal-Gear-Servo
#4
murnan mom rb m3
airtronics m11
futaba s9350 throttle
s9350 steering
orion 1600 reciever pack
the futaba servos are in my oppinion one of the best i have been running mine for 2 years and had no problems yet.
#6
Mugen MTX-4R
Airtronics M11 tx
Airtronics 2.4 rx
for throttle/brake and steering futaba BLS451
battery reedy 1600 (1.6 volts)
Airtronics M11 tx
Airtronics 2.4 rx
for throttle/brake and steering futaba BLS451
battery reedy 1600 (1.6 volts)
#10
Tech Adept
futaba 9452 for both
dx3r
dx3r
#11
MTX4R
3PK 2.4
BLS-451 for both( actually just switched throttle to BLS-551 to try)
Orion 1600mah minh
Jp Eagle TL-3
Stratus 3.1
the brushless servos run nice and cool and LAST. I fried 3 digital servos in six months before switching(throttle). My friends also comment on how smooth my throttle feels, they run KO and air
3PK 2.4
BLS-451 for both( actually just switched throttle to BLS-551 to try)
Orion 1600mah minh
Jp Eagle TL-3
Stratus 3.1
the brushless servos run nice and cool and LAST. I fried 3 digital servos in six months before switching(throttle). My friends also comment on how smooth my throttle feels, they run KO and air
#12
I run that same throttle servo because you really don't need anymore torque and speed then what that servo puts out but for steering i use the jr9100s with 180oz of torque and .06 speed it is insanely fast which is perfect for racing and it makes it seem that the servo moves before before i turn the wheel
#13
Tech Master
iTrader: (2)
For parking lot racing/bashing, two of these is all you need. $55 bucks a piece
http://www.amainhobbies.com/product_...tal-Gear-Servo
http://www.amainhobbies.com/product_...tal-Gear-Servo
#15
Kyosho Vone RRR Evo 2 WC
JLR Tuned
Futaba 4PK
Futaba 9451 x 2
Intellect 1600mAh
JLR Tuned
Futaba 4PK
Futaba 9451 x 2
Intellect 1600mAh