Serpent 733 1/10 200mm touring
#2941
i mean a photo from pietsch's car that show the diff parts that he used.
i can see some parts in page 17-18 but i can't see a lot of difference.
maybe it's my eyes!
#2944
Why in this photo Bearingblock-2sp-alu left and right are different of the original and I think that also the Bearingblock rr up alu is different... thanks...
http://1.bp.blogspot.com/_TqHxNOPef8..._6065048_n.jpg
http://1.bp.blogspot.com/_TqHxNOPef8..._6065048_n.jpg
#2945
Why in this photo Bearingblock-2sp-alu left and right are different of the original and I think that also the Bearingblock rr up alu is different... thanks...
http://1.bp.blogspot.com/_TqHxNOPef8..._6065048_n.jpg
http://1.bp.blogspot.com/_TqHxNOPef8..._6065048_n.jpg
#2946
Tech Champion
iTrader: (8)
Why in this photo Bearingblock-2sp-alu left and right are different of the original and I think that also the Bearingblock rr up alu is different... thanks...
http://1.bp.blogspot.com/_TqHxNOPef8..._6065048_n.jpg
http://1.bp.blogspot.com/_TqHxNOPef8..._6065048_n.jpg
#2947
#2948
Registered User
733 bearings
Has any one had issues with bearing on the diff melting the diff housing. i have checked all my bearings and some are gritty so i have replaced them now. Could any one recomend a good site for new bearing kit. I race nearly every sunday since april and the car is awsome out of the box
#2949
Tech Elite
iTrader: (52)
Has any one had issues with bearing on the diff melting the diff housing. i have checked all my bearings and some are gritty so i have replaced them now. Could any one recomend a good site for new bearing kit. I race nearly every sunday since april and the car is awsome out of the box
I run ABEC35 bearings. Here are the sizes you need for the entire car:
1 x 5x10 x4mm Type-X economy ball bearings
1 x 5x8 x2.5mm general economy ball bearings, ABEC 5 *Shield Type : 2 x metal shields
1 x 6x13 x5mm Type-X economy ball bearings
1 x 6x10 x3Fmm Type-X economy flange ball bearings
1 x Serpent 710, 720, 733 ball bearing set (XSO)
#2950
Tech Fanatic
iTrader: (7)
The bearings are apparently oiled, not greased, so I would suggest keeping a very close eye on them.
I run ABEC35 bearings. Here are the sizes you need for the entire car:
1 x 5x10 x4mm Type-X economy ball bearings
1 x 5x8 x2.5mm general economy ball bearings, ABEC 5 *Shield Type : 2 x metal shields
1 x 6x13 x5mm Type-X economy ball bearings
1 x 6x10 x3Fmm Type-X economy flange ball bearings
1 x Serpent 710, 720, 733 ball bearing set (XSO)
I run ABEC35 bearings. Here are the sizes you need for the entire car:
1 x 5x10 x4mm Type-X economy ball bearings
1 x 5x8 x2.5mm general economy ball bearings, ABEC 5 *Shield Type : 2 x metal shields
1 x 6x13 x5mm Type-X economy ball bearings
1 x 6x10 x3Fmm Type-X economy flange ball bearings
1 x Serpent 710, 720, 733 ball bearing set (XSO)
Mitch
#2953
dls system
hi guys,
can anyone tell me should i use the anti roll bar at the rear after
installing the dls system.
i got mine 2 days ago. looks good
i read some news say that is design for without the use of rear anti roll bar
tks
wee
can anyone tell me should i use the anti roll bar at the rear after
installing the dls system.
i got mine 2 days ago. looks good
i read some news say that is design for without the use of rear anti roll bar
tks
wee
#2955
http://events.redrc.net/wp-content/g...rpentdls-3.jpg
Did anyone notice the 2speed bulkhead and rear bulkhead, are different with stock car? And they linked together with plastic-like column.
Kind surprise no one seems say anything about it on forum, all focus is on DLS/DAX (which I personally think just marketing buzz)
Did anyone notice the 2speed bulkhead and rear bulkhead, are different with stock car? And they linked together with plastic-like column.
Kind surprise no one seems say anything about it on forum, all focus is on DLS/DAX (which I personally think just marketing buzz)