R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Nitro On-Road

Reply
 
Thread Tools Search this Thread
Old 02-14-2010, 03:50 PM   #1921
Tech Elite
 
Ultraspeed84's Avatar
 
Join Date: Mar 2006
Posts: 2,072
Trader Rating: 45 (100%+)
Default

http://www.amainhobbies.com/product_...-Balancer-Plug

will this battery fit my 733 thanks
__________________
yokomo yz-2
Ultraspeed84 is offline   Reply With Quote
Old 02-14-2010, 04:20 PM   #1922
Tech Elite
 
Pattojnr's Avatar
 
Join Date: Apr 2006
Location: Perth Australia
Posts: 4,594
Trader Rating: 19 (100%+)
Default

Quote:
Originally Posted by Ultraspeed84 View Post
http://www.amainhobbies.com/product_...-Balancer-Plug

will this battery fit my 733 thanks
http://cgi.ebay.com.au/Intellect-Li-...item3caa00cff6
this is the one i use. i see the dimensions are slightly smaller than the one you listed.
__________________
Serpent - Walter RC
Serpent E Power ..... Serpent 747 Reds M3T
Serpent 966-TE Reds M7T .... S411ERYX Speedpassion 3.5T, T-Shox
Serpent 811-TE REDs R5T
Pattojnr is offline   Reply With Quote
Old 02-14-2010, 05:28 PM   #1923
Tech Fanatic
 
Team-RTR's Avatar
 
Join Date: Jan 2004
Location: sydney
Posts: 917
Default

Quote:
Originally Posted by Ultraspeed84 View Post
http://www.amainhobbies.com/product_...-Balancer-Plug

will this battery fit my 733 thanks
i also use the one patto jnr listed, it fits nice and snugly in the car plus you dont need to run a regulator, any bigger then the intillect li-fe pack and you run the rusk of the receiver pack rubbing on the side belt.
__________________
SERPENT | NOVAROSSI | XRAY | TEKIN | FUTABA
Team-RTR is offline   Reply With Quote
Old 02-14-2010, 05:49 PM   #1924
Tech Elite
 
Ultraspeed84's Avatar
 
Join Date: Mar 2006
Posts: 2,072
Trader Rating: 45 (100%+)
Default

thanks guys i just bought that one u posted up... i think it will work fine...
__________________
yokomo yz-2
Ultraspeed84 is offline   Reply With Quote
Old 02-14-2010, 05:50 PM   #1925
Tech Elite
 
Ultraspeed84's Avatar
 
Join Date: Mar 2006
Posts: 2,072
Trader Rating: 45 (100%+)
Default

what body will be the most stable on this car?
__________________
yokomo yz-2
Ultraspeed84 is offline   Reply With Quote
Old 02-14-2010, 09:11 PM   #1926
Tech Adept
 
ProE's Avatar
 
Join Date: Dec 2005
Location: South Africa
Posts: 236
Send a message via MSN to ProE Send a message via Skype™ to ProE
Default Pinion

Will the 720 steel pinions work with the 733 spur gears?
ProE is offline   Reply With Quote
Old 02-14-2010, 09:29 PM   #1927
Tech Elite
 
Azizi's Avatar
 
Join Date: Jul 2007
Posts: 2,723
Trader Rating: 6 (100%+)
Default

Quote:
Originally Posted by Ultraspeed84 View Post
what body will be the most stable on this car?
u can try Mazda 6 or Dodge Stratus.
Azizi is offline   Reply With Quote
Old 02-14-2010, 09:49 PM   #1928
Tech Addict
 
Join Date: Mar 2007
Posts: 630
Trader Rating: 1 (100%+)
Default

Just finished building a 733 for a freind of mine, and i can say it was the easiest build of a 1/10th scale ive ever done! everything went together smooth, no bidding in the arms, and the drive train was free from the get go! This car is so easy to work on its a very well designed car! I look forward to getting one soon! I run the 966 but i think i need a 733!
__________________
Jeremy Cupps
Sponsors are
Mugen Seiki, NovaRossi Engines, Enneti Tires, Byrons racing fuel, Airtronics, XceedRC, Mikes HobbyShop Porter Texas, Global Hobby Distributors, Avid Bearings, Paint by Smiley, and my wallet!
J-MAN is offline   Reply With Quote
Old 02-15-2010, 12:42 AM   #1929
Tech Fanatic
 
Team-RTR's Avatar
 
Join Date: Jan 2004
Location: sydney
Posts: 917
Default

what grease are you guys running on your 2 speed oneways? read a few pages back serpent oneway lube is no good for the new style bearings, is this actually the case?
__________________
SERPENT | NOVAROSSI | XRAY | TEKIN | FUTABA
Team-RTR is offline   Reply With Quote
Old 02-15-2010, 03:08 AM   #1930
Tech Elite
 
Pattojnr's Avatar
 
Join Date: Apr 2006
Location: Perth Australia
Posts: 4,594
Trader Rating: 19 (100%+)
Default

Quote:
Originally Posted by Team-RTR View Post
what grease are you guys running on your 2 speed oneways? read a few pages back serpent oneway lube is no good for the new style bearings, is this actually the case?
i have used ball diff grease on initial use.
then just a little every once and a while. Tamiya ceramic grease i used.
__________________
Serpent - Walter RC
Serpent E Power ..... Serpent 747 Reds M3T
Serpent 966-TE Reds M7T .... S411ERYX Speedpassion 3.5T, T-Shox
Serpent 811-TE REDs R5T
Pattojnr is offline   Reply With Quote
Old 02-15-2010, 04:38 PM   #1931
Tech Elite
 
Serpent-Dan's Avatar
 
Join Date: Dec 2007
Location: Florida
Posts: 2,850
Trader Rating: 16 (100%+)
Default

Quote:
Originally Posted by Ultraspeed84 View Post
what body will be the most stable on this car?
Xceed A5 and Blitz 2.3
__________________
Inf1nity CM Beat1 Racing
Serpent-Dan is offline   Reply With Quote
Old 02-16-2010, 05:31 AM   #1932
Tech Fanatic
 
NiTrO BoOsTeR's Avatar
 
Join Date: Dec 2007
Location: Toowoomba
Posts: 947
Trader Rating: 7 (100%+)
Default

hey guys im building my 733 and im up to setting the clutch. i cant get the .7mm gap, im running a Novarossi 3SCT tuned engine and it almost like the bolt that holds the thrust bearing holder inplace isnt long enough to bottom out in the crankshaft. im using the flywheel cone that came with the engine, could i take a little bit off the cone, would this help or am i doing something wrong.

Thanks guys
__________________
Serpent 733 - RB T10rc - Ko Helios EX-10
Serpent 733 - Novarossi 3SCT Tuned
============== SERPENT the only way ============
==== Pro Buggy Rc, Pitsworth - for all my RC needs =====
NiTrO BoOsTeR is offline   Reply With Quote
Old 02-16-2010, 06:09 AM   #1933
Tech Elite
 
dj apolaro's Avatar
 
Join Date: May 2005
Location: Miami, Fl.
Posts: 2,399
Default

Quote:
Originally Posted by NiTrO BoOsTeR View Post
hey guys im building my 733 and im up to setting the clutch. i cant get the .7mm gap, im running a Novarossi 3SCT tuned engine and it almost like the bolt that holds the thrust bearing holder inplace isnt long enough to bottom out in the crankshaft. im using the flywheel cone that came with the engine, could i take a little bit off the cone, would this help or am i doing something wrong.

Thanks guys
You can do that or try another cone. Make sure there is no spacer behind the cone also. It is not needed.

DJ Apolaro
__________________
Capricorn RC, Capricorn Tires, Novarossi World, Spektrum, Horizon Hobby, PROTOform, RCTarget, IGT8.
dj apolaro is offline   Reply With Quote
Old 02-16-2010, 02:06 PM   #1934
Tech Fanatic
 
NiTrO BoOsTeR's Avatar
 
Join Date: Dec 2007
Location: Toowoomba
Posts: 947
Trader Rating: 7 (100%+)
Default

thanks for that

Mitchell
__________________
Serpent 733 - RB T10rc - Ko Helios EX-10
Serpent 733 - Novarossi 3SCT Tuned
============== SERPENT the only way ============
==== Pro Buggy Rc, Pitsworth - for all my RC needs =====
NiTrO BoOsTeR is offline   Reply With Quote
Old 02-17-2010, 12:08 PM   #1935
Tech Adept
 
ProE's Avatar
 
Join Date: Dec 2005
Location: South Africa
Posts: 236
Send a message via MSN to ProE Send a message via Skype™ to ProE
Default

Quote:
Will the 720 steel pinions work with the 733 spur gears?
Anyone?
ProE is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
RCMC 1/8, 1/10 Gas Singapore National Series round 3, 23 AUG 2009 backplate Singapore R/C Racers 47 08-27-2009 12:03 AM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 08:00 PM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net