Drillbit

iTrader: (2)

I have a NTC3 with a after market swing rack made by a company called K factory. Well I had bit of a crash the other day and stripped out one of the screws. All I have is the factory swing rack with bushings I cant fins anywere on the net to get K factory parts. I have seen the bearing upgrade kit for the NTC3 I was wandering if this is a worth while upgrade or if there are any other suggestions for a after market swing Rack. And if anyone has heard of or can find a place to purchase K factory parts apparently you cant order direct off there site.

fastharry™

iTrader: (4)

Hi Drillbit. I still have my NTC3, although I race my r40 more. The stock swing rack is fine when you add the bearings. It's all I have ever used. You might try calling this place, maybe they can help locate a swing rack

http://www.brooklynhobbies.com/index...SetPageSize=75


Rc mart shows the swing rack as discontinued....

http://www.rcmart.com/catalog/team-a...=123&pstatus=0




but, as I said, the stock one is fine with the bearings.

lil-bump

iTrader: (89)

I would loose the k factory rack and go with the plastic rack with bearings. I'm not sure if AE offered the swing rack in graphite that would be better yet.


Pass you soon...

Roadrash730

iTrader: (9)

hey just buy a MUGEN haha

Drillbit

iTrader: (2)

yeah blah blah blah you and your mugen hype. Lol


Well I got it fixed just a case of the dumb asses . I started looking and it is a factory swing rack with the factory bearing upgrade its just has a brace from k factory hold the the swing rack together ( makes it more stable I guess ) Another question anybody got setup specs for the NTC3 I bought the car used and its all out of wack I got it back to factory but I was wandering if anyone has any suggestions as far as setup?

fastharry™

iTrader: (4)

AE has all the downloads for the car.....

and the manuals have all the stock specs and set-ups....


I ran my car with the stock set-up and it worked great. They have a recommended set up for rubber or foam tires...


http://67.199.85.166/resources/resources.php

thewood1987

Just recently installed the bearing kit on my stock swing rack and I noticed it eliminated mostly all of the slop. Now all I need is new ball cups for the servo lever. Then all slop should be gone.