Maximum Oversteer?
For a project, I want to have the least rear traction both on and off power.
What can I do? Rear spool Hard springs Thicker shock oil 0 toe Stiff rear roll bar ? |
Large amounts of rear camber, stiffest springs in the rear, a spool, thickest shock oil.
|
Extreme front toe out, stand your shocks up as vertical as possible. These will aid with the above mentioned :nod:
A real hard, snappy clutch will help aswell:nod: |
Just do away with the shocks. Use tierod ends and turnbuckles to replace the shock. That should reduce rear grip alot.
|
just use drift tires in the rear. :nod:
if still not enough; use a solid axle for the rear! :D |
10 degree toe out at the rear and 10 degree toe in at front.
using a spool in the rear axle would be nice. |
Originally Posted by airborneranger
(Post 5492507)
For a project, I want to have the least rear traction both on and off power.
What can I do? Rear spool Hard springs Thicker shock oil 0 toe Stiff rear roll bar ? |
sounds like a drifter.............:rolleyes:
|
Originally Posted by airborneranger
(Post 5492507)
For a project, I want to have the least rear traction both on and off power.
What can I do? Rear spool Hard springs Thicker shock oil 0 toe Stiff rear roll bar ? one way 10 wt shock oil jaco pink tires tamiya yellow springs 2 mm ride height rear spool 80 wt shock oil jaco 40 tires x ray red springs 10 mm ride height no rear wing:eek: |
All times are GMT -7. It is currently 08:56 PM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.