:o Well, those are some shock scraps that I have picked up and built over these years. So only 2 or 3 sets are new type while the others are the old type screwed on piston. All of them are also not adjustable type. Some of them I have built from the fixed type pistons. But all of them with purple O rings, red shock bladders and foam inserts.:nod:

O thank god I thought this car had all these bugs in them and you needed to do all this to get it working properly but coming from you master D im glad you replied to my post and showed me the light:nod:

aslo why did you do the clutch mod is there something wrong with the one that comes in the kit:confused:

also D that engine your running the Masimo Fantini on your 710 is superv great choice:nod:

Well, it's also pretty expensive. :cry: You could also get the JP FX12 engine. Very expensive too.:(

What do the others think about this engine? Any experience / observations? Goldfinger / Pyramid?

The stock clutch setting is a little soft. You either use the stock clutch mounts with the new yellow shoe as it bites better or mod the clutch and use the black shoe to get it to bite better.

I had the Mspeed motor but nothing imrpesss me in the performance wise comaring to those Max....however, the only thing i found difference was Mspeed has a very good gas flow and the motor runnning in a very low temperature even i tried to lean the engine....however, they don't have a good top end comparing to those MAX and Jp....

It is additional, not a hardcore or die hard modded.
Nothings perfect, except when we "believe" it is perfect.

cool thx D so when you say "as it bites better" you mean quicker initial acceleration:confused:

also how do you quote people on these forums for example
Originally posted by xxxxxxx?

Well, not quicker acceleration but better clutch engagement.

Click on the "Quote" button on the right side.;)

Re: Re: Re: Re: Texas Biggie 2004
 

:sneaky: WAS THAT A SHOT AT ME??? AND MY BODS??? LOL... I WOULD NEVER BREAK THE RULES:lol: :sneaky: "Da Hellion"

thx D ;)

:lol: :lol: It would have been better if D is also our local racers.. I would have no need to build any shocks..:lol: :lol:

Just wait for the stripped shocks:smile: It`s rude of you to point out/quote that message as it clearly stated what those `craps` all about if you read it.

Yes I have no shims under the head. Thought the 25% nitro was blowing my glowplugs because of that but it seemed to work fine now:D

Till now, Im very satisfied with the stock RR12L3.
Just need to try to equip it with ceramic bearing :eek: :sneaky: