Serpent 710
Starter box
What type of starter box do you guys use? I have a Serpent starter box powered with 2 x 6 cells 3000 Nimh and its not powerful enough to spin the flywheel on my new motor. I finally got the motor runing using some other starter box at local track. (dont remember brand).
After I broke-in new motor on 710 I can barely start it with Serpent box but there is no way I can spin the flywheel on my 960.
Any suggestions??
max
After I broke-in new motor on 710 I can barely start it with Serpent box but there is no way I can spin the flywheel on my 960.
Any suggestions??
max
That's very strange. I have owned a serpent and its starter box for nearly two years and have never experienced that. Those starter boxes are rather powerful!
Either your batteries have gone bad or the motors are damaged.
As far as starting a new motor, how about preheating it with a hair dryer if you are starting your engine for the first time. After break-in it should be fine.
Either your batteries have gone bad or the motors are damaged.
As far as starting a new motor, how about preheating it with a hair dryer if you are starting your engine for the first time. After break-in it should be fine.
Tech Fanatic
RCC Shocks
Hi Guys,
Just a quick note to let you know that we have the new shocks in stock and available. They fit all the Serpent cars. Part number is #903164 for the fronts and #903165 for the rears. They come pre build and ready to go. Check with your LHS.
Serpent USA
Just a quick note to let you know that we have the new shocks in stock and available. They fit all the Serpent cars. Part number is #903164 for the fronts and #903165 for the rears. They come pre build and ready to go. Check with your LHS.
Serpent USA
Buyer Beware
Originally Posted by Paolo M
Hi Guys,
Just a quick note to let you know that we have the new shocks in stock and available. They fit all the Serpent cars. Part number is #903164 for the fronts and #903165 for the rears. They come pre build and ready to go. Check with your LHS.
Serpent USA
Just a quick note to let you know that we have the new shocks in stock and available. They fit all the Serpent cars. Part number is #903164 for the fronts and #903165 for the rears. They come pre build and ready to go. Check with your LHS.
Serpent USA
whats the us price?
Tech Fanatic
Originally Posted by HELLOkitty
is this for the 710?
whats the us price?
whats the us price?
Check qith your LHS for pricing
Serpent USA
Buyer Beware
Originally Posted by Paolo M
Fits Impulse all versions, 705 and 710 in the 200mm class, fits Impact and 835 in the 235mm clas and all the 1/8 scale cars (Vector all versions, Veteq all versions, 950 , etc. etc
Check qith your LHS for pricing
Serpent USA
Check qith your LHS for pricing
Serpent USA
Originally Posted by Paolo M
Hi Guys,
Just a quick note to let you know that we have the new shocks in stock and available. They fit all the Serpent cars. Part number is #903164 for the fronts and #903165 for the rears. They come pre build and ready to go. Check with your LHS.
Serpent USA
Just a quick note to let you know that we have the new shocks in stock and available. They fit all the Serpent cars. Part number is #903164 for the fronts and #903165 for the rears. They come pre build and ready to go. Check with your LHS.
Serpent USA
Jose
Tech Fanatic
Originally Posted by rcpanama
Hi where can we get a list of your US local Hobbies, My shipping is in the USA
Jose
Jose
Is a long list........ Where are you located? We have everywhere, East to West Coast
Paolo
Originally Posted by Paolo M
Hi Jose,
Is a long list........ Where are you located? We have everywhere, East to West Coast
Paolo
Is a long list........ Where are you located? We have everywhere, East to West Coast
Paolo
Originally Posted by Paolo M
Hi Guys,
Just a quick note to let you know that we have the new shocks in stock and available. They fit all the Serpent cars. Part number is #903164 for the fronts and #903165 for the rears. They come pre build and ready to go. Check with your LHS.
Serpent USA
Just a quick note to let you know that we have the new shocks in stock and available. They fit all the Serpent cars. Part number is #903164 for the fronts and #903165 for the rears. They come pre build and ready to go. Check with your LHS.
Serpent USA
Tech Adept
Originally Posted by Sow&Steady
Check this out!
(after reading that you'll want them and it's gonna cost you real money . I know I want them....)
Tech Elite
iTrader: (11)
Hey Guys,
I found this on an article on MyTSN regarding the 2005 spec 710 kit
"Some 2005 improvements include;
*Uppgraded and improved manual.
*Thicker rear shocktower (3mm).
*Two new tools included for the centax and 2-speed.
*The new rear diff-clamp.
*Extra 1mm shims for the front roll-center adjustment.
*Extra plastic parts for fixed shock setting.
*New type looking wheelnuts."
With regards to the new rear diff clamp is that 802393? It also talks about new centax tools included in the kit, is that 1462? What parts are urgent upgrades? I look forward to hearing from you all shortly.
BB
I found this on an article on MyTSN regarding the 2005 spec 710 kit
"Some 2005 improvements include;
*Uppgraded and improved manual.
*Thicker rear shocktower (3mm).
*Two new tools included for the centax and 2-speed.
*The new rear diff-clamp.
*Extra 1mm shims for the front roll-center adjustment.
*Extra plastic parts for fixed shock setting.
*New type looking wheelnuts."
With regards to the new rear diff clamp is that 802393? It also talks about new centax tools included in the kit, is that 1462? What parts are urgent upgrades? I look forward to hearing from you all shortly.
BB
No it's not the alu part. The 802387 is included in the kit.
Important extra's:
Front ball diff #802370. I run it close to everywhere.
Options for better drivers (otherwise spend the money on tires = practice!)
Chassis 4mm alu. T6 Team #802121
Engine monoblock M12 (ME/PI) #802553 (or #802552 for Nova engines)
Bracket radioplate support alu #802136
Increase overall stiffness
CV-axles set #802350 No more lost bones and smoother drivetrain in corners
Other nice to have options: (if you've money to spare)
Hex wheel adaptors Orange # 802255
Lightweight pulley adapters #802165
Alu front upper arm brace #802220
Important extra's:
Front ball diff #802370. I run it close to everywhere.
Options for better drivers (otherwise spend the money on tires = practice!)
Chassis 4mm alu. T6 Team #802121
Engine monoblock M12 (ME/PI) #802553 (or #802552 for Nova engines)
Bracket radioplate support alu #802136
Increase overall stiffness
CV-axles set #802350 No more lost bones and smoother drivetrain in corners
Other nice to have options: (if you've money to spare)
Hex wheel adaptors Orange # 802255
Lightweight pulley adapters #802165
Alu front upper arm brace #802220
Originally Posted by Julius
Other nice to have options: (if you've money to spare)
Hex wheel adaptors Orange # 802255
Lightweight pulley adapters #802165
Alu front upper arm brace #802220
Hex wheel adaptors Orange # 802255
Lightweight pulley adapters #802165
Alu front upper arm brace #802220
Originally Posted by markp27
Julius, you forgot about the 3hobby go-faster stickers from Bro Slow's website - proven to give at least 0.5 second per lap
But fortunately they are not obtainable anymore. I have all of them