|
Originally posted by InitialD Who's the other older guy? Take your pick... ObiWan or older still Master Yoda.:lol: :lol: :lol: |
Re: Re: A picture which should have been on 3hobby
Originally posted by InitialD Ah, nice pics ! :nod: What are those nice extra 4 short antenas on each car?:rolleyes: For additional GSM 900 / 1800 dual band capability?:lol: |
Re: Re: Re: Hubs & driveshafts
Originally posted by InitialD :lol: :lol: :lol: I guess that's because you guys supposedly have the RING ! :rolleyes: :sweat: :lol: :lol: :lol: |
Originally posted by InitialD Ahem, ahem... :rolleyes: :lol: :lol: :lol: A tip ! :rolleyes: Look for the oldest guy with the biggest beer belly.:nod: :lol: |
Re: Goes to show ...
Originally posted by Sow&Steady Mark Bro ... goes to show that your track is for lawnmowers ... look at the starting grid ... its wider than even a 1:8th car! :lol: :lol: :lol: |
Re: Re: Re: A picture which should have been on 3hobby
Originally posted by markp27 Anyway, dual band is passe :lol: :lol: WiFi or Bluetooth enabled instead?:lol: :lol: :lol: |
Re: Re: Re: Re: A picture which should have been on 3hobby
Originally posted by InitialD Sorry.:sweat: WiFi or Bluetooth enabled instead?:lol: :lol: :lol: |
1 Attachment(s)
Hi just to maintain you inform how the snake is doing in Panama;
One of our club driver from the expert group went hi look the way my 710 was performing he decided to change from R40 to 710, I help him with the building of the car and Set Up. The result was that he broke the record of our small track and finish first with the TQ I have been busy building my second 710 so now their two I will be raising again on Sunday the 12, mist last race because work I was in the US. |
Re: Hubs & driveshafts
Originally posted by B4 Watched the Florida Winternats today. Yes got it for fathers day. Anyway noticed one Michael Salven has Xray hubs but I could see what driveshafts he used. I tried my hubs and driveshafts from my Xray EVO 2 and the hubs fit perfectly but the driveshafts are to short. If there is anyone that knows, it's got to be Sow&Steady or markp27. These guys seem to have so much time to tinker with there 710's. Anyway would appreciate any input also the plastic end on the Xray driveshaft would seem to negate the problem with the dogbone wearing a notch in the ball diff. MarkP just built an XRay ... wondered if he tested the driveshaft or looked at the dimensions. I nearly oredered a set of these XRay stuff but decided to cancel it in the end as I heard Serpent may be releasing a few things soon ... :sneaky: |
Originally posted by Denso#1 Markp27 Benarty on its longest track is the G.P. circuit at 223m long and is 4m wide i believe the lap record is 17.186 seconds :cool: Becuase our track is made up of painted islands we have 23 possible track layouts clockwise and anti clockwise :nod: |
Re: Re: Hubs & driveshafts
Originally posted by Sow&Steady B4, thanks for the complements to me and MarkP but alas, we're just two olf farts pretending to tinker with our 710s. Actually MarkP is the older farter than me! :sneaky: :lol: :sweat: :blush: MarkP just built an XRay ... wondered if he tested the driveshaft or looked at the dimensions. I nearly oredered a set of these XRay stuff but decided to cancel it in the end as I heard Serpent may be releasing a few things soon ... :sneaky: |
Re: Re: Re: Re: Hubs & driveshafts
Originally posted by markp27 No proble, :D I'm sure I also speak for Sow, when I say that it is an honour to be mistaken for InitialD :lol: :lol: :lol: Regarding Michael's car I'm pretty sure it was D (:rolleyes: who else ;) ) who first spotted this. D is reacently not so quick on the forums, but it may well be due to RING abuse :lol: :lol: :cry: :cry: :lol: :lol: Anyway, I broke one today (rear right dogbone) just as the main started. Happened on the straight, car veered off to the right and then flipped 3 feet into the air, doing at least 3 full sumersaults! :( :cry: End of race ... |
Re: Re: Re: Hubs & driveshafts
Originally posted by markp27 [B Ehm, *cough* of course *cough* :D What? :confused: think it is time for my medication again...now where did I put it :rolleyes:[/B] :eek: Man that Ring mastery for dummies must be paying off! I knew I should have ordered a copy :mad: Finally raced with 17-22 ... |
Re: Re: Re: Re: Hubs & driveshafts
Originally posted by Sow&Steady I'm really worried about our friend here ... keeps forgetting stuff. Soon he'll show up at AMCC with a "lawnmower" instead of his 710!!! :lol: Originally posted by Sow&Steady And I will ordering a bunch of spurs. Stripped 2 61t spurs today ... both times running 16-21 pinions. I think this one Serpent needs to own up. Not even Pyramid's solution seemed to work. Finally raced with 17-22 ... If not, then go with 16/60. That'll be better.:nod: |
I ran my 710 for the first time today. I must say it is much smoother than the NTC3. I like it. Although I did manage to break to. Is anyone running the cvd's for this car or are the stock dog bones better.
Thanks in advance. |
| All times are GMT -7. It is currently 11:43 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.