R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Nitro On-Road (https://www.rctech.net/forum/nitro-road-3/)
-   -   Basic help (https://www.rctech.net/forum/nitro-road/25681-basic-help.html)

Reaper V6 10-09-2003 06:57 AM

Basic help
 
hey guys i know this must sound pathetic but i need to know how to start a petrol powered car i thought i knew but it looks like i don't
cheers

lee82gx 10-09-2003 07:23 AM

this might sound even more pathetic:
read your manual!!!

anyway,this is the basics:
prime engine(make sure fuel is entering the carb)
plug the heater on the glow plug(make sure it's charged and the plug is working)
pull the starter with short 1/2 feet pulls,quickly.or put it on the starter box and press it down.
this is assuming u have done the breaking-in,have set the needle properly etc,etc.

2mcgrath 10-11-2003 02:41 PM

make sure the needles are set right...prime the motor watch for fuel to enter the carb...and make sure glow plug is good...put glow charger on with a good charge and it should fire up pretty quickly..just dont prime it to much or you will flood it


All times are GMT -7. It is currently 07:24 AM.

Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.