Rc10ntc3
#3826
Tech Regular
Originally posted by mave
Looks cool! look like it has more steering than the NTC3.
Looks cool! look like it has more steering than the NTC3.
#3827
Tech Adept
Originally posted by fuse01
steering tie rods issue
can someone suggest to me how to solve this issue?
one slight knock and the car will come back with more toe out then i ever need wahaha. sometime even came back with 10degree each side!!! i tried superglue didnt work on the cups thread. i tried new cups (black) didnt work...
any other suggestions? on the steering sups?
steering tie rods issue
can someone suggest to me how to solve this issue?
one slight knock and the car will come back with more toe out then i ever need wahaha. sometime even came back with 10degree each side!!! i tried superglue didnt work on the cups thread. i tried new cups (black) didnt work...
any other suggestions? on the steering sups?
that sound weird. Is your servo saver very hard? Sound as if you drive right into a gigantic wedge that spread your front wheel apart.
but seriously, it shouldn't happen..
#3828
Tech Fanatic
to mave
yeah servo saver is super hard.. using spacers to compress the stock springs.
anyway any suggestion? the stock servo saver spring is junk.
yeah servo saver is super hard.. using spacers to compress the stock springs.
anyway any suggestion? the stock servo saver spring is junk.
#3829
Tech Adept
Originally posted by simonfdr
Looks like a nice copy cat.
Looks like a nice copy cat.
#3830
Tech Regular
Didn't another company make that?
#3831
Tech Adept
Originally posted by simonfdr
Didn't another company make that?
Didn't another company make that?
#3832
Tech Apprentice
Originally posted by mave
Seemingly, it is another company..
Seemingly, it is another company..
#3833
i just ordered the Hardcore Racing Titanium upper deck for my ntc3. and i ordered the aluminum anodized blue drive shaft too. the upperdeck is anodized blue.
#3834
here is the hardcore racing titanium upper deck i ordered
#3835
Originally posted by herb
It looks like a regular NTC3 with a copy of the hopups of RDLogic, Hardcore and K-Factory on it...
It looks like a regular NTC3 with a copy of the hopups of RDLogic, Hardcore and K-Factory on it...
#3837
R/C Tech Founder
Hey guys,
I am thinking about getting into nitro a bit for the summer, probably with a TC3.
I don't know too much about the various engines and stuff out there, nor what all I'd need for the car to get it up and running. I'd need to get a ROAR-legal engine/pipe, and I'd prefer to run Futaba servos. I already have the other radio gear necessary.
Any recommendations on an engine/pipe for the car? What else would I need to get it going competitively?
I am thinking about getting into nitro a bit for the summer, probably with a TC3.
I don't know too much about the various engines and stuff out there, nor what all I'd need for the car to get it up and running. I'd need to get a ROAR-legal engine/pipe, and I'd prefer to run Futaba servos. I already have the other radio gear necessary.
Any recommendations on an engine/pipe for the car? What else would I need to get it going competitively?
#3838
Mugen MT-12 is a very strong engine, so are the Sirio and OS-TR motors, i have run all with good results, as far as pipes...stick with the associated, i really couldn't get any results worth spending extra money for a aftermarket pipe.
#3839
Originally posted by XER987
When you guys run Jaco Nitro shoes, do you have to run the 2mm offset rears??
When you guys run Jaco Nitro shoes, do you have to run the 2mm offset rears??
#3840
Tech Adept
Nice NTC3 haha then LD3 is a beutiful hoped up NTC3. But damn could it be all show no Go hahah. the only way for the Ofna team to sell is to have a fully hop up car to do the things the the ntc3 does box stock. Better quality better everything Ae