Kyosho V-ONE RRR EVO 2
05-27-2010, 07:05 AM
#2131
. I did the same thing to a couple of mine last year before i got the atomic box.
I was also thinking of getting the top deck that allows me to use the NT1 fuel tank to make low needle adjustments easier.
05-27-2010, 07:47 AM
#2132
Do you think they actually would replace it, even myself living overseas (EU) ? Thanks
05-27-2010, 09:37 PM
#2133
Oh just remembered I had a manual here at work.
If you follow the manual you will see that having the R on the right in position 1 is the loosest belt tension. You then go up to position 2 and then 3. This is making the belt tighter.
From there you switch them around to the other side and 1 is the next tightest still with 2 and 3 being the tightest settings.
Hope that makes sense.
I normally run mine with the Left on the left and the right on the right and in position 3 when I have a new belt and then go tighter from there as the belt loosens up.
05-28-2010, 04:16 PM
#2134
They can be installed on either side...... Cant remember off the top of my head but basically you have 6 adjustments depending on if the eccentric is on the left or right hand side.
Oh just remembered I had a manual here at work.
If you follow the manual you will see that having the R on the right in position 1 is the loosest belt tension. You then go up to position 2 and then 3. This is making the belt tighter.
From there you switch them around to the other side and 1 is the next tightest still with 2 and 3 being the tightest settings.
Hope that makes sense.
I normally run mine with the Left on the left and the right on the right and in position 3 when I have a new belt and then go tighter from there as the belt loosens up.
Oh just remembered I had a manual here at work.
If you follow the manual you will see that having the R on the right in position 1 is the loosest belt tension. You then go up to position 2 and then 3. This is making the belt tighter.
From there you switch them around to the other side and 1 is the next tightest still with 2 and 3 being the tightest settings.
Hope that makes sense.
I normally run mine with the Left on the left and the right on the right and in position 3 when I have a new belt and then go tighter from there as the belt loosens up.
05-31-2010, 04:33 AM
#2136
hey guys, how much does your shell weigh?
mine is weighing 120.. but i got glue and etc on it.
wondering how much it would weigh without it?
mine is weighing 120.. but i got glue and etc on it.
wondering how much it would weigh without it?
05-31-2010, 04:39 AM
#2137
protoforms are extremely light.. but don't take much beating... (there maybe choices in thickness though)
05-31-2010, 04:48 AM
#2138
im using a stratus.. i thought 120g was abit heavy.. i put glue inside the shell for abit of extra strength.. but wondering how much it would weigh without it.
05-31-2010, 05:08 AM
#2139
05-31-2010, 05:25 AM
#2140
05-31-2010, 10:26 PM
#2142
