break in of kyosho gs15r
 

hi
i have a new gs15r which i would like to break in but i,m not shaw what plug it should have is it a os A3? i think i will use 10% nitro.
also does any body know what the high speed needle should be set at for a rich breakin.
or do you think i should be using 15%,20% nitro? will this make much difference in power and engine life.
thank for any help

Re: break in of kyosho gs15r
 

The plug to have for the GS15-R is the OS #8.

The high speed needle should be set anywhere between 2 to 2 1/2 turns out, but just as long as there's plenty of smoke and the engine stays relatively cool.

I broke my engine in with 25% Nitro, I don't think it makes a difference as long as you tune it correctly. I'll most likely be going back to 16% though.

Hope this helps :) .