FUSION DRAG
hi anyone/everyone, just want to know more about drag cars in RC nitro set up, im really keen to custom my schumacher fusion into full drag car and im around 60% do'in it. for start do you know where I can get some part for a drag rc? anyone who has done this project or similar, pls help! ill post some pics soon, thanks for your time!
|
drag racing parts can be got at grand motorsports, team walbern, litespeed. their parts are for purpose built drag cars not a transformed one. i have two grand motorsports (electric and nitro) cars and the quality is top notch!
|
I have drag raced a fusion in the bracket raceing class. Also a NTC3 and V-ONE-RR EVO. I had alot of trouble getting the car to launch straight until i tightened down the diffs until they were basiscly spools. Lock them down. Most cars are over geared for the 132 foot drag strip. The 3 speed in the fusion is useless. What parts do you want?
|
If you have a high output motor on your fusion and want some wider tires on the rear end to improve traction you might check with wolfpack radicals , he make adapters for the shumacher fusion so you can use 1/8 scale onroad tires.
|
drags
do you have some websites for these parts
|
thanks!
Originally Posted by LOW ET
(Post 4142378)
drag racing parts can be got at grand motorsports, team walbern, litespeed.
|
|
thanks!
Originally Posted by wizby
(Post 4142391)
I have drag raced a fusion. I had alot of trouble getting the car to launch straight until i tightened down the diffs until they were basiscly spools. Lock them down. Most cars are over geared for the 132 foot drag strip. The 3 speed in the fusion is useless. What parts do you want?
|
thanks my friend!
Originally Posted by nitrohead5300
(Post 4142559)
If you have a high output motor on your fusion and want some wider tires on the rear end to improve traction you might check with wolfpack radicals , he make adapters for the shumacher fusion so you can use 1/8 scale onroad tires.
|
Originally Posted by 2fast4fusion
(Post 4143331)
long time no chat my friend, I've seen your username every forum site I go to. yeah I had my fusion drag and smashed it but now im fully rebuilding it for drag only and make it rear wheel drive and extended. ived done the 1/8 rear wheels as close as possible to the diff to take off hard and saight as possible. but now im kinda looking for a drive belt size 270mm length with 90T in 5mm with or just even closer, if you know anything pls let me know cos I need as soon as possible to get t is thing running. by the way what " wolfpack radicals " do my friend are they spare parts? how's your car?
|
Here is apicture of my Wolf Fusion:Dhttp://pic15.picturetrail.com/VOL595.../169505835.jpg
|
does anyone know which boat pipe to use for a rc drag car? I heared couple of guys use the boat pipe for drag but don't know which one....
|
Originally Posted by 2fast4fusion
(Post 4147813)
does anyone know which boat pipe to use for a rc drag car? I heared couple of guys use the boat pipe for drag but don't know which one....
|
Originally Posted by LOW ET
(Post 4147866)
prather #9010 for .21 engines. you're probably better off just using a regular style pipe.
|
ok, well what would be the best tuned pipe for NOVA MAX .21 for drag ? pls help!
|
All times are GMT -7. It is currently 03:37 PM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.