GT class--buggy-based on road!
#1681
Tech Master
iTrader: (26)
Join Date: Dec 2005
Location: (Holiday, Fl.) (CST.Allentown, Pa.)
Posts: 1,314
Trader Rating: 26 (100%+)
that's the katana rx rtr body
#1682
Tech Addict
Hello from France,
the body you see (mazda6 ou stratus) are for touring car that runs the same day.
The body we use in RG were: PF8, Maserati MC12, Mc Laren, Renault Megane Trophy, Subaru...
au revoir
the body you see (mazda6 ou stratus) are for touring car that runs the same day.
The body we use in RG were: PF8, Maserati MC12, Mc Laren, Renault Megane Trophy, Subaru...
au revoir
#1683
Based on the Katana buggy platform, the Katana Rallycross (RX) RTR is more than just a buggy with a sedan body thrown onto it. The chassis is slightly longer for more high-speed stability, and is capable of over 50mph with it's shoe-type two-speed transmission. Several gear ratios are available. The shocks are also shortened, but the RX is still capable of running in the dirt. Plenty of shock positions are available to adjust the ride height. Many upgrades from the Katana buggies also fit, and the wheels are standard 17mm hex so you can use any buggy tire and wheel combination, from knobbies to foams.
Katana RX Features:
Durable 6061 Anodized Aluminum Chassis
PRP .27 Engine w/pullstart (2.7hp 40000RPM)
Hitec 2ch Aggressor AM Radio System
4mm 6061 Aluminum Shock Towers
Shoe-type 2-speed Transmission
Lightweight 3-shoe Racing Clutch
Adjustable Heatsink Engine Mounts
Front Hardened CV-Joint Set
Tuned Aluminum Pipe and Manifold
Rubber slick tires on Nylon spoke rims
Pre-cut, pre-painted Touring body
Impact-absorbing foam front bumper
All assembled and ready to run!
Larry's Performance R/C's
42246 Mound Rd.
Sterling Heights, MI 48314
586-997-4840
[email protected]
Retail: $599.99
Your Price: $299.95
You Save: 50.01%
seems pretty good car for GT Spec Class....
AFM
Katana RX Features:
Durable 6061 Anodized Aluminum Chassis
PRP .27 Engine w/pullstart (2.7hp 40000RPM)
Hitec 2ch Aggressor AM Radio System
4mm 6061 Aluminum Shock Towers
Shoe-type 2-speed Transmission
Lightweight 3-shoe Racing Clutch
Adjustable Heatsink Engine Mounts
Front Hardened CV-Joint Set
Tuned Aluminum Pipe and Manifold
Rubber slick tires on Nylon spoke rims
Pre-cut, pre-painted Touring body
Impact-absorbing foam front bumper
All assembled and ready to run!
Larry's Performance R/C's
42246 Mound Rd.
Sterling Heights, MI 48314
586-997-4840
[email protected]
Retail: $599.99
Your Price: $299.95
You Save: 50.01%
seems pretty good car for GT Spec Class....
AFM
#1685
Tech Adept
Yup, right until the wheels fall off.
#1687
Guest
Is anyone importing STR8 from Hobbytech?
Is anyone importing STR8 from Hobbytech?
#1688
Tech Addict
Hello from france,
for it's first race, the Hobbytech STR8 RG, take 1-3 in qualification and 1-2 in final !!!
Very good car.
The French Hobbytech Brand is looking for a distributor in the US.
some videos of the race.
http://www.dailymotion.com/guiguitt/...iste-difficile
http://www.dailymotion.com/guiguitt/...blade-rx1_auto
http://www.dailymotion.com/guiguitt/...-finale-b_auto
http://www.dailymotion.com/guiguitt/...-finale-b_auto
Au revoir.
for it's first race, the Hobbytech STR8 RG, take 1-3 in qualification and 1-2 in final !!!
Very good car.
The French Hobbytech Brand is looking for a distributor in the US.
some videos of the race.
http://www.dailymotion.com/guiguitt/...iste-difficile
http://www.dailymotion.com/guiguitt/...blade-rx1_auto
http://www.dailymotion.com/guiguitt/...-finale-b_auto
http://www.dailymotion.com/guiguitt/...-finale-b_auto
Au revoir.
#1692
Tech Fanatic
iTrader: (5)
For the next 4 to 5 months, I don't see any growth for the GT class in Houston. Yesterday was the last onroad race at GCRC. We took down all the board on the track so they can begin reconstruct for for possibly the 2010 1/10 200mm IFMAR worlds. Should be somthing great when it is completed. Once GCRC open the onroad track, then we will see the growth of the GT class. I think Jeff mentioned they will shoot for a GCRC Grand Prix Race for the first race on the new layout.
#1693
Vad, congrats on your win!
Looks like you're having fun.
Mika, those metal rims look nice too.
Looks like you're having fun.
Mika, those metal rims look nice too.