Hong Kong Axial Cup Photo
#1

We finally have our Axial Cup (Touring car only) this weekend. ( postpone 3 times due to bad weather). Good turn out with over 40 drivers.
NT 1(Picco Evo 3) Took the win by less then 2 sec over Mugen MTX 4 (OS Speed)
3rd, 4th and 5th was alll X ray NT 1. First 5 places all finished on the same lap, very tight race indeed.
I finished 5th with the Axial engine( a car spin in front of me on the start, i hit him then I drove whole race with a 4.5degree front left camber
)
All enjoyed the race, and thanks Mak for taking the pictures.
Please enjoy some of the photos.
1. the 1st place NT1
2. TQ Car
3. My car ...with someone looking to over take me!
4. Too close
5. this is more like it.. 4th place lapping 9th place ( i think)
NT 1(Picco Evo 3) Took the win by less then 2 sec over Mugen MTX 4 (OS Speed)
3rd, 4th and 5th was alll X ray NT 1. First 5 places all finished on the same lap, very tight race indeed.
I finished 5th with the Axial engine( a car spin in front of me on the start, i hit him then I drove whole race with a 4.5degree front left camber

All enjoyed the race, and thanks Mak for taking the pictures.
Please enjoy some of the photos.
1. the 1st place NT1
2. TQ Car
3. My car ...with someone looking to over take me!
4. Too close
5. this is more like it.. 4th place lapping 9th place ( i think)
Last edited by kitracer; 07-16-2007 at 02:18 AM. Reason: 2nd is MTX 4
#2

My mechanic little too slow when refuelling!!

#3

group photos and more
#4

U did us axial fans proud. That'll do Kit, That'll do.

#5
Tech Master
iTrader: (3)
Join Date: Dec 2001
Location: Costa Del Sol, Marbella, Spain www.bradir.net
Posts: 1,456
Trader Rating: 3 (100%+)

nice photos kitracer! btw, dad will be in hk this weekend.. he'll give you a call.. btw nice track! more pics please!!
#6
#7
Tech Elite

iTrader: (2)
Join Date: Dec 2003
Location: Cebu City, Philippines and Ocala, Florida, USA
Posts: 3,840
Trader Rating: 2 (100%+)

Nice pictures...
Any videos?


#9
#10
#11


#12
#13

Chris, host of the event, very busy you are on that day, can't never by you to talk something and can't never you during final too! too fast you are
one question, what is difference between Spec I and II?

#14

The induction timming changed but duration is the same.
The sleeve have deeper cut inside ( not on the outside) so the angle have changed, increased the speed of the mxtures(enter) and on exhaust , angle changed so the exsit "volume" increased. Sorry I dont have techincal terms to explain.
Overall slighty moved power band and improve power little.
BTW, thanks for coming to the race

Report will be on Sept Issue of the HK RC magazine. (www.rc-magazine.com)
#15