bakaguyjean

iTrader: (1)

The Arms are not priced to bad, They are only 1572 Yen, for either 2 or 1.5 Degree camber.
I think the 2 degrees might be to much.

The Kyosho pipe is expensive compared to the Inferno pipe, It should be priced around 6500 Yen,but im a cheap RC racer s that might be normal.
The roll bar should be around 2000 Yen.
I wont know untill we have them here. for the exact price.

bakaguyjean

iTrader: (1)

You have a little monster there. Cant wait to see the body.

Zootcapri

iTrader: (6)

Photos of the mod on page 11 of this thread. Instruction are on page 12. It is really pretty simple and easy. The latest 'final' configuration is on page 19 at the bottom of the page. The fit is great and performance is improved.

Just think.. .in the configuration from Kyosho you will get about three minutes of good run time... with the Losi tank conversion... you will get 15 minutes of good run time.... you make the call....

border r/c

oops,
yes now I understand how the tank has to be placed many thanks for this did not read the whole thread here yet.

i will give it a try again but will try also the NTC3 tank from K-factory we have a few left on stock
thxs

iceman76

iTrader: (1)

I LOST A WHEEL NUT DOES ANYONE KNOW WHERE I CAN GET SOME ASAP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1

Zootcapri

iTrader: (6)

I bought some spares... but you'd get them as quickly from Ivan.

Zootcapri

iTrader: (6)

The K factory tank would certainly be low... but it screws in from the bottom like any NTC3 tank. The Losi tank screwed into the top plate in one spot. Two places if you count the hole I drilled in the rear of the plate... all three if you count the mount to the braces.

Let me know how that works out.

iceman76

iTrader: (1)

He is out of stock

Taylorm

608 replies to this thread...............NO INTEREST IN U.S., HUH KYOSHO........................

Zootcapri

iTrader: (6)

There have been 300 views to the Losi tank modification on page 11 for a car that 'there is no interest in'. Not just the car... but 300 views for the modification..... maybe if we stop showing interest they will import it....

border r/c

part nr for K-factory tank is k1206
we have a few left and is not made anymore

Taylorm

coming from Kyosho soon, but still NO SPADA......... Mini-Z racer Ferrari 512BB
30392Y-B: Mini-Z racer Ferrari 250 GTO
30393BK-B: Mini-Z racer Porsche 934 RSR Turbo (Black)
30393R-B: Mini-Z racer Porsche 934 RSR Turbo (Red)
30567MB-JB: Mini-Z AWD Volkswagen Golf R32 (Blue)
30567S-JB: Mini-Z AWD Volkswagen Golf R32 (Silver)
30861T1-B: Lazer ZX-5 ReadySet (Red/Gray)
30861T2-B: Lazer ZX-5 ReadySet (Yellow/Blue)

rcg33k

You guys are idiots. Childish antagonism is REALLY going to help open up the discussion. Note that they (Kyosho) haven't been back. Hey, maybe if you insult them MORE, then they'll be back!

rcg33k

You guys are idiots. Childish antagonism is REALLY going to help open up the discussion. Note that they (Kyosho) haven't been back. Hey, maybe if you insult them MORE, then they'll be back!

Zootcapri

iTrader: (6)

Kyosho has made it clear through several 'sources' that they do not intend on bringing in the Spada. The activity on this thread shows significant interest. The number of cars that have been brought into the country knowing that Kyosho doesn't plan on bring them in to the USA is significant. Aftermarket parts for the car are flowing into the US regularly.

Be careful who you are calling 'idiots'.