Mugen MTX-4R
#3076
#3078
#3080
hi guys...
can i expect more steering ( ability to turn faster & tighter at medium speed corner ) by increasing the height of front upper arms ?
( in mtx4 and mrx4, i'm talking of adding 1mm shims or 2mm shims underneath the upper arm bulkhead ).
Thank you guys
can i expect more steering ( ability to turn faster & tighter at medium speed corner ) by increasing the height of front upper arms ?
( in mtx4 and mrx4, i'm talking of adding 1mm shims or 2mm shims underneath the upper arm bulkhead ).
Thank you guys
#3082
I need more steering in middle of cornering ( less push ).
I hope you understand now.
#3083
Tech Fanatic
iTrader: (1)
Middle shaft and pulleys (1st axle from front)
Hi!
I try get point from manual of mtx-4 but I can't find how many T each one pulley have
From manual: T029E and T029A, at rcmart I found that 3racing do 23T and 18T,
but maybe I can use mugen sets.
From manual I got that axle is 6mm dia, so for me it is ok.
I'm looking for pulleys with screw, 23T and 18T for my kyosho RRR, I do little
modification for middle shaft. Mod is for novarossi .12 with roto. I think
that tooth from kyosho belt fit mtx pulley.
I have nice axle from 7065-t6 but have problems with hole for pins, so,
maybe I can use mugen pulleys with screw
Please forgive my Englis
Thank you,
m.
I try get point from manual of mtx-4 but I can't find how many T each one pulley have
From manual: T029E and T029A, at rcmart I found that 3racing do 23T and 18T,
but maybe I can use mugen sets.
From manual I got that axle is 6mm dia, so for me it is ok.
I'm looking for pulleys with screw, 23T and 18T for my kyosho RRR, I do little
modification for middle shaft. Mod is for novarossi .12 with roto. I think
that tooth from kyosho belt fit mtx pulley.
I have nice axle from 7065-t6 but have problems with hole for pins, so,
maybe I can use mugen pulleys with screw
Please forgive my Englis
Thank you,
m.
#3084
Tech Elite
iTrader: (10)
tired http://www.pro-s-futaba.co.jp/home/ - always got plenty stock and very fast service!
Also below is my final car complete - simple virgin white with a bit of added colour to the wing "YES" Pink!
I have given the car about 6 tanks so she well running but still running it a tab rich as its Winter season and our track time has been limited due to poor weather... hopefully this week we can race, its been over 6 weeks and no racing rrrrrrrrrrhhhhh
Enjoy the photos guys
Frankie
Also below is my final car complete - simple virgin white with a bit of added colour to the wing "YES" Pink!
I have given the car about 6 tanks so she well running but still running it a tab rich as its Winter season and our track time has been limited due to poor weather... hopefully this week we can race, its been over 6 weeks and no racing rrrrrrrrrrhhhhh
Enjoy the photos guys
Frankie
Last edited by Kodak Hodak; 06-22-2009 at 08:15 AM.
#3085
what front uprights are you running? the 138 has that problem bad, the 138b has more initialo it's bad too, the 164 is the best.
#3086
#3087
and ...
#3088
Btw, if I increase the height of upper arms, can I expect more steering from it ?
Thanks.
#3089
Tech Adept
iTrader: (1)
I'm looking for a Mugen MTX-4R in good condition. Roller, Combo anything. You can PM me for offers or email me at [email protected]
Thanks
Thanks