robert maestrey

not sure where you can get this...but ill do some research and find out for you

Brian Bosley

iTrader: (13)

I got my sirio clutch from http://stores.ebay.com/Rdvtg-Hobbies for $74, he seems to be out of stock.. you're next best bet is http://www.the-border.nl but they're out of stock too.. it's hard to find.

robert maestrey

Yep I was gonna post border but you beat me to the finish line

shesha

iTrader: (1)

Quick question, is the servo saver supposed to be replaced when using a diff in the front ?

My servo saver is hitting the diff case, any ideas.

Thanks

robert maestrey

I have never used a diff in the RRR so i don't have experience regarding this issue...I'm sure you can use a dremel and trim certain areas so they don't make contract...hope this helps

shesha

iTrader: (1)

Robert, if I dremel any of the plastic it's going to either make the diff leak or the push rods plastic weak, so thats out of the question, I just tried to replace the servo saver from either numbers it did not fix anything.

Another fix is to replace the balls with ball stud and use plastic ball cups that might fix it, but i find it hard that kyosho would over look something like this, anyone else faced this problem and has a fix ?

shesha

iTrader: (1)

Looks like the ball end is the fix, looking over the EVO WC manual they replaced that item with ball ends. Will give it a try.

doc56

iTrader: (1)

TQVM

doc56

iTrader: (1)

Can the kyosho clutch shoes fit the sirio clutch assembly?

robert maestrey

cool good luck hope it works for you

robert maestrey

no...serpent shoe will...recommend yellow

doc56

iTrader: (1)

what abour the NT1 clutch shoes? by the way, how does the clutch shoe's colour represent? can u shed some light for me? TQVM

robert maestrey

pretty sure the xray shoe is too big needs to be serpent....the yellow shoe grabs better..

evo1

iTrader: (6)

Hi Everyone.
I'm running the Plus 3 ct with the 3D clutch. Just wondering what clutch spring preload would be a good place to start ,for medium to high grip level.
Regards Paul

robert maestrey

1.2-1.3 should work fine ....