R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Nitro On-Road

Reply
 
Thread Tools Search this Thread
Old 04-17-2007, 10:24 PM   #1561
Tech Champion
 
RC MARKET's Avatar
 
Join Date: Feb 2007
Location: HK
Posts: 6,172
Trader Rating: 12 (100%+)
Default

Quote:
Originally Posted by rmdhawaii
Do you have these in stock? How many you got??

http://rcmarket.com.hk/product_info....roducts_id=720
instock 5pcs up !
RC MARKET is offline   Reply With Quote
Old 04-18-2007, 04:11 AM   #1562
Tech Fanatic
 
huskerfreak's Avatar
 
Join Date: Feb 2004
Location: HuskerNation
Posts: 956
Trader Rating: 5 (100%+)
Default

Quote:
Originally Posted by TedX

This track is just minutes away from the Nation's Capital

RC Pro Series two-day race entry form
Can be submitted at the track on race day.

Capital Classic June 6th-10th
Factory drivers already registered. 160 max. entries. Don't miss this one!
Nice track it looks a lot like are here in Lincoln Ne only minutes from the state's capitol

huskerfreak is offline   Reply With Quote
Old 04-18-2007, 04:36 AM   #1563
Tech Addict
 
twiggy's Avatar
 
Join Date: Jan 2007
Location: sydney, australia
Posts: 710
Trader Rating: 2 (100%+)
Default

Quote:
Originally Posted by MRX4-R03
What is the main difference in th e front and rear bulkheads compared to the rrr wc edition and are the upper front arms also different ...
the rear bulkheads have extra 3 holes to mount the upper camber link in. the front bulkheads stay the same.
the front upper arms are the same.
__________________
www.Moorebankraceway.com

Hamilton 2008 F1 champion!
twiggy is offline   Reply With Quote
Old 04-18-2007, 11:50 AM   #1564
Tech Regular
 
Join Date: Aug 2005
Posts: 272
Trader Rating: 1 (100%+)
Default

I was looking at the evo wc shock posts, is it easier to just buy the FM529 evolva front shock set (13mm) than to buy everything individually or do you still have to buy pistons and springs? also, is it the same shock front and rear or is it also the FM530 evolva rear shocks?
brianhatesnitro is offline   Reply With Quote
Old 04-18-2007, 12:04 PM   #1565
Tech Addict
 
Eric Gebhard's Avatar
 
Join Date: Aug 2004
Posts: 508
Default

If you buy the entire shock kit you will still need to buy the pistons and springs. The EVO uses the same shock front and rear.
Eric Gebhard is offline   Reply With Quote
Old 04-18-2007, 01:28 PM   #1566
Tech Adept
 
Join Date: Sep 2006
Location: Athens
Posts: 213
Default

Quote:
Originally Posted by Dowg
I built mine last week with hex head screws from Tony's Screws and am glad i did, the kit comes with phillips head screws that usually rounded off by the time they were even half way into the plastic.
heres a link to Tony's
https://www.tonysscrews.com/displayP...5&categoryId=2
has anyone to post some pics from those "Tony's screws"?does this kit of screws worth buying?what are these screws made of?titanium,steel,aluminum or what?thanks in advance
nickiphorosn is offline   Reply With Quote
Old 04-18-2007, 05:32 PM   #1567
Tech Apprentice
 
Join Date: Feb 2005
Location: San Francisco
Posts: 52
Send a message via AIM to Berwick.G
Default I am apart of the Team........... :)

Well I just picked up my Kyosho V-One RRR Evo WCE from Rc Tech in Daly City California. Lawrence and Terrance are awesome, but anyways I am very pleased with the way the kit looks in parts. I have a list of what I have gather to be important hop-ups and some stuff I thought I would like. If I am missin anything please let me know... Well here is my list....

K-Factory Racing Racing Brake Pads (K1498)
Kyosho SP Main Chasis (VZW214)
Kyosho Aluminum Middle Shaft (VZW216)
Kyosho Lightweight Clutch Bell (VZW213)
Kyosho Aluminum Brake Lever (VZW063)
Kyosho Rear Pully adaptor (the one that looks like a Mugen adaptor) (VZW223)
K-Factory Ventilated Brake Disc (K1901)
Kyosho SP Rear Shock Stay (VZW207)
Skyline V-One RRR 4mm Shock Tower (SKL-5002)
Hexcrews Kyosho V-One RRR Hex Head AP Conversion Kit

I also Have some other questions what battery pack should I get if that matters that much. Also I have a Airtroncs MX3 FM radio system and I have a 94758Z servo should I use this one or buy different airtronics servos and if so which airtronics servos are good steering and throttle servos.
Berwick.G is offline   Reply With Quote
Old 04-18-2007, 05:37 PM   #1568
Tech Apprentice
 
Join Date: Feb 2005
Location: San Francisco
Posts: 52
Send a message via AIM to Berwick.G
Default Futhermore

My next question is what is a good pipe thats readily available to pair up with my Nova Mega SX12 5port trubo MS.... I was thinking skyline. Also since I have the evo WCE. I was thinking of changing the cars upper deck and getting the proper linkage need to cobvert it back to laydown throttle servo. Is this really worth it or not in you guys opinion.
Berwick.G is offline   Reply With Quote
Old 04-18-2007, 05:50 PM   #1569
Tech Addict
 
Dynamite's Avatar
 
Join Date: May 2004
Location: Australia
Posts: 614
Send a message via MSN to Dynamite
Default

hey Berwick.G

i went from the rrr wce to an evo and was aprehensive about the standup throttle servo too, i was going to use my old top deck when building the car, but decided to try the evo one with the standup servo.

i have been running the evo for a few months now and havent even worried about trying the laydown servo by using top deck from my old car... car seems good where i have it setup atm, and if it aint broke dont fix it
__________________
www.racingfactory.org
Kyosho RRR Evo | Sirio Evo III STI | Ko Radio
Dynamite is offline   Reply With Quote
Old 04-18-2007, 06:29 PM   #1570
Tech Champion
 
GMartinez's Avatar
 
Join Date: Dec 2004
Location: Sunshine State
Posts: 8,163
Trader Rating: 85 (100%+)
Default

Quote:
Originally Posted by Berwick.G
Well I just picked up my Kyosho V-One RRR Evo WCE from Rc Tech in Daly City California. Lawrence and Terrance are awesome, but anyways I am very pleased with the way the kit looks in parts. I have a list of what I have gather to be important hop-ups and some stuff I thought I would like. If I am missin anything please let me know... Well here is my list....

K-Factory Racing Racing Brake Pads (K1498)
Kyosho SP Main Chasis (VZW214) this is used for high bite tracks
Kyosho Aluminum Middle Shaft (VZW216)
Kyosho Lightweight Clutch Bell (VZW213)
Kyosho Aluminum Brake Lever (VZW063)
Kyosho Rear Pully adaptor (the one that looks like a Mugen adaptor) (VZW223)
K-Factory Ventilated Brake Disc (K1901) will not work on evo but will on RRRWCE
Kyosho SP Rear Shock Stay (VZW207)
Skyline V-One RRR 4mm Shock Tower (SKL-5002) stock is good enough
Hexcrews Kyosho V-One RRR Hex Head AP Conversion Kit

I also Have some other questions what battery pack should I get if that matters that much. Also I have a Airtroncs MX3 FM radio system and I have a 94758Z servo should I use this one or buy different airtronics servos and if so which airtronics servos are good steering and throttle servos.
You can use the servo for throttle but you will need a real good steering servo
__________________
www.fullthrottlercraceway.com
Home of The U.S. World Nitro Cup 2013,2014,2015,2016
2014 Roar Electric Nationals, IFMAR ISTC Worlds, 2015 Roar Fuel Nationals
2017 U.S.World Nitro Cup Nov 29th - Dec 3rd
U.S.Open Fuel Championship Returning soon
GMartinez is offline   Reply With Quote
Old 04-18-2007, 06:31 PM   #1571
Tech Master
 
Ivan Dickson's Avatar
 
Join Date: Jan 2005
Location: Cali Love USA
Posts: 1,643
Trader Rating: 12 (93%+)
Thumbs up

Quote:
Originally Posted by Berwick.G
Well I just picked up my Kyosho V-One RRR Evo WCE from Rc Tech in Daly City California. Lawrence and Terrance are awesome, but anyways I am very pleased with the way the kit looks in parts. I have a list of what I have gather to be important hop-ups and some stuff I thought I would like. If I am missin anything please let me know... Well here is my list....

K-Factory Racing Racing Brake Pads (K1498)
Kyosho SP Main Chasis (VZW214)
Kyosho Aluminum Middle Shaft (VZW216)
Kyosho Lightweight Clutch Bell (VZW213)
Kyosho Aluminum Brake Lever (VZW063)
Kyosho Rear Pully adaptor (the one that looks like a Mugen adaptor) (VZW223)
K-Factory Ventilated Brake Disc (K1901)
Kyosho SP Rear Shock Stay (VZW207)
Skyline V-One RRR 4mm Shock Tower (SKL-5002)
Hexcrews Kyosho V-One RRR Hex Head AP Conversion Kit

I also Have some other questions what battery pack should I get if that matters that much. Also I have a Airtroncs MX3 FM radio system and I have a 94758Z servo should I use this one or buy different airtronics servos and if so which airtronics servos are good steering and throttle servos.
Welcome to the RRR club Nice hopups far as reciever pack I use intellect 1400s and servo I have Futaba S9451 for steering & for throttle I use a standard servo. Skyline VR12plus is a good pipe for many different motors also not sure about the specs. on 94758Z.
__________________
SPECIAL THANKS TO ✦ MY WIFE ✦✦ MOTIV RC ✦✦ GRAVITY RC ✦✦ JGO PAINTZ ✦✦ TQ RC RACEWAY ✦✦ TAMIYA RACEWAY ✦
Ivan Dickson is offline   Reply With Quote
Old 04-18-2007, 07:01 PM   #1572
Tech Elite
 
rmdhawaii's Avatar
 
Join Date: Feb 2006
Posts: 3,804
Trader Rating: 4 (100%+)
Default

Quote:
Originally Posted by Berwick.G
Well I just picked up my Kyosho V-One RRR Evo WCE from Rc Tech in Daly City California. Lawrence and Terrance are awesome, but anyways I am very pleased with the way the kit looks in parts. I have a list of what I have gather to be important hop-ups and some stuff I thought I would like. If I am missin anything please let me know... Well here is my list....

K-Factory Racing Racing Brake Pads (K1498)
Kyosho SP Main Chasis (VZW214)
Kyosho Aluminum Middle Shaft (VZW216)
Kyosho Lightweight Clutch Bell (VZW213)
Kyosho Aluminum Brake Lever (VZW063)
Kyosho Rear Pully adaptor (the one that looks like a Mugen adaptor) (VZW223)
K-Factory Ventilated Brake Disc (K1901)
Kyosho SP Rear Shock Stay (VZW207)
Skyline V-One RRR 4mm Shock Tower (SKL-5002)
Hexcrews Kyosho V-One RRR Hex Head AP Conversion Kit

I also Have some other questions what battery pack should I get if that matters that much. Also I have a Airtroncs MX3 FM radio system and I have a 94758Z servo should I use this one or buy different airtronics servos and if so which airtronics servos are good steering and throttle servos.
Welcome to the club.

The KFactory Ventilated Brake Disc (K1901) is probably not going to work with the Evo, because the brake pulley was revised. I think it's step 17 in the manual.

I'm not sure how well VZW207 will fit on the Evo, because the rear bulkhead was revised. Maybe someone else knows.

On VZW214, I would run the car for maybe a gallon of fuel before trying it, so you can better guage the before and after performance.

On the Hexcrews conversion kit, just keep in mind, that it doesn't come with any button head screws. Do not use the "Regular Socket Cap" screws for the bottom engine mount screws, as they will protrude below the chassis, which is not a good thing.

IMO, you can leave the servo "as is".

Hope this helps.
__________________
Nitro Knowledge Base: http://nitrokb.netne.net
My YouTube Channel: http://www.youtube.com/nitrokb -> Lots of on-road nitro & eletric action + some off-road as well
My Flickr Photostream: http://www.flickr.com/photos/nitrokb/
Kyosho V-ONE RRR WC (x2) \ XRAY T2'007 \ Also owned: XRAY NT1 & Mugen MTX-4

Last edited by rmdhawaii; 04-18-2007 at 07:11 PM.
rmdhawaii is offline   Reply With Quote
Old 04-18-2007, 07:19 PM   #1573
Tech Elite
 
bvoltz's Avatar
 
Join Date: Jun 2005
Location: Bedtime with Teddi
Posts: 3,635
Trader Rating: 44 (100%+)
Default

Quote:
Originally Posted by nickiphorosn
has anyone to post some pics from those "Tony's screws"?does this kit of screws worth buying?what are these screws made of?titanium,steel,aluminum or what?thanks in advance
I'm not sure what pictures will do for you.... Yes, by the kit, it is much stronger then anything I have used... made from steel, but it is stronger then normal screws. He has the hole kit, and I puchased extras for the motor mount and the rear camber link on top of the hub. This screw bends from the pressure, but not Tony's stuff... I'm just a normal racer, paying my way, so I'm not tied to Tony....
__________________
Wheeling an Xray T4 and T4 14 using a Ko Propo, powered by EA motors and Speed Passion Speedo, paid for by my wife.

Digi3Dworks - 3D printing for the medical Field.
bvoltz is offline   Reply With Quote
Old 04-18-2007, 07:35 PM   #1574
Tech Apprentice
 
Join Date: Feb 2005
Location: San Francisco
Posts: 52
Send a message via AIM to Berwick.G
Default Well Were do I go from here.

Quote:
Originally Posted by rmdhawaii
Welcome to the club.

The KFactory Ventilated Brake Disc (K1901) is probably not going to work with the Evo, because the brake pulley was revised. I think it's step 17 in the manual.

I'm not sure how well VZW207 will fit on the Evo, because the rear bulkhead was revised. Maybe someone else knows.

On VZW214, I would run the car for maybe a gallon of fuel before trying it, so you can better guage the before and after performance.

On the Hexcrews conversion kit, just keep in mind, that it doesn't come with any button head screws. Do not use the "Regular Socket Cap" screws for the bottom engine mount screws, as they will protrude below the chassis, which is not a good thing.

IMO, you can leave the servo "as is".

Hope this helps.

well what screws should I use for the bottom engine mount screws. Does this mean that every other screw will work.Also I was thinking about using servo for throttle and getting different steering servo. What about using the KM-rc ventilated brake disc. What two servos from air tronics do you recommend for steering and throttle.
Berwick.G is offline   Reply With Quote
Old 04-18-2007, 08:29 PM   #1575
Tech Elite
 
rmdhawaii's Avatar
 
Join Date: Feb 2006
Posts: 3,804
Trader Rating: 4 (100%+)
Default

Quote:
Originally Posted by Berwick.G
well what screws should I use for the bottom engine mount screws.
Order some additional screws - like from Tony's Screws.

Quote:
Originally Posted by Berwick.G
Does this mean that every other screw will work.
No, it's not that bad. As best as I can recall, the bottom engine mount screws are the only ones I had an issue with.

Quote:
Originally Posted by Berwick.G
Also I was thinking about using servo for throttle and getting different steering servo. What two servos from air tronics do you recommend for steering and throttle.
Sorry, I don't use Airtronics - never tried them either. I use the Futaba S9451 for both steering and throttle. Maybe someone else can recommend some Airtronics servos.

Quote:
Originally Posted by Berwick.G
What about using the KM-rc ventilated brake disc.
That will fit, as it was made for the Evo. I just haven't heard anything about it.

http://www.km-rc.com/oscommerce/cata...roducts_id=346
__________________
Nitro Knowledge Base: http://nitrokb.netne.net
My YouTube Channel: http://www.youtube.com/nitrokb -> Lots of on-road nitro & eletric action + some off-road as well
My Flickr Photostream: http://www.flickr.com/photos/nitrokb/
Kyosho V-ONE RRR WC (x2) \ XRAY T2'007 \ Also owned: XRAY NT1 & Mugen MTX-4
rmdhawaii is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
FOR SALE - Mugen MBX5T ProSpec and Kyosho STR with chassis conversion and Kyosho big MattWells R/C Items: For Sale/Trade 5 04-28-2017 10:25 AM
1986 1/12 Kyosho Plazma MKIII With Kyosho LeMan 600E Motor Funkymojo R/C Items: For Sale/Trade 2 05-17-2012 11:11 AM
Custom painted Kyosho SP2 and Kyosho STRR bodies.... RC3 Graphics SWEET W/ PICS CRFXXXT R/C Items: For Sale/Trade 1 01-07-2008 07:38 PM
MACH. 28/NEW PS, KYOSHO MINI INFERNO ST/W/3NEW IB1400 8 CELL PACKS, KYOSHO 1./8 BUGGY newbie2 R/C Items: For Sale/Trade 5 11-18-2007 06:07 PM
Convert Kyosho Quick Start system on Kyosho QRC to Pullstart Morpheus2be Monster Trucks 0 02-16-2005 11:26 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 09:39 AM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net