98LikesSerpent SRX8-GT
05-09-2019, 10:24 AM
#46
nvm
i didnt know that serpents manuals are digital only now
i didnt know that serpents manuals are digital only now
Last edited by acsilver; 05-09-2019 at 04:49 PM.
05-09-2019, 10:53 AM
#47
05-09-2019, 04:19 PM
#48
I have these on my Nitro Cobra 811 buggy and work perfect, no issues at all
https://www.amainhobbies.com/bk-serv...ksbl01/p388039
https://www.amainhobbies.com/bk-serv...ksbl01/p388039
05-09-2019, 05:20 PM
#49
Oooh look!
Oooh look?!!!! ......... Need time off work. Got stuff to do 😉
05-09-2019, 11:58 PM
#50
Tech Initiate
05-10-2019, 02:29 AM
#51
Tech Addict
05-10-2019, 06:03 AM
#52
05-10-2019, 06:03 AM
#53
05-10-2019, 06:08 AM
#54
Car goes together very well only couple of points I found were the front diff eccenters were very tight in the alu bulkheads and needed a bit of sanding to get them to fit properly and allow the front bulkheads to close. The other thing was the rear right chassis brace which (badly) hits the back of the radio tray. I had to cut down the brace to fit. Not major things but still things to watch out for! Enjoy the build.
05-12-2019, 05:21 AM
#55
05-12-2019, 05:22 AM
#56
I have these on my Nitro Cobra 811 buggy and work perfect, no issues at all
https://www.amainhobbies.com/bk-serv...ksbl01/p388039
https://www.amainhobbies.com/bk-serv...ksbl01/p388039
05-13-2019, 04:45 AM
#57
I do understand your point in have to have a 'car' servo, BKServo even on their website categorize the BLS-8001HV as a car servo as well.
05-14-2019, 08:48 AM
#58
Just because AMain have these under the 'Helicopter' category does not mean they are Heli servos specific. Many of their surface team drivers use them with no issues at all. Also I rather have a servo where their customer service is above and beyond from the rest in the field.
I do understand your point in have to have a 'car' servo, BKServo even on their website categorize the BLS-8001HV as a car servo as well.
I do understand your point in have to have a 'car' servo, BKServo even on their website categorize the BLS-8001HV as a car servo as well.
but for me I'll choose the proven platforms like Sanwa especially at that price point. In all my years of racing I've rarely needed to call upon any customer support with my sanwa servos as they are very very good
05-14-2019, 09:26 AM
#59
Cool no worries. Never heard of them in over 25 years of racing! Oh well you learn something new everyday but for me I'll choose the proven platforms like Sanwa especially at that price point. In all my years of racing I've rarely needed to call upon any customer support with my sanwa servos as they are very very good
but for me I'll choose the proven platforms like Sanwa especially at that price point. In all my years of racing I've rarely needed to call upon any customer support with my sanwa servos as they are very very goodI run M12 Radio and do like the idea, even if hard to prove as "better", of using same brand servo's.
To be fair. I have also ran Radiopost "Signature" servo's for some years with my M12 and never had any issue's either.
Dan. When are you likely to be able to run the car? Interested in your experience's with the new diff's.
Regards
BM
05-14-2019, 10:50 AM
#60
I confess I also like the Sanwa Servo's. Not always the fastest and highest torque, but very close. Have never had issues with them at all either.
I run M12 Radio and do like the idea, even if hard to prove as "better", of using same brand servo's.
To be fair. I have also ran Radiopost "Signature" servo's for some years with my M12 and never had any issue's either.
Dan. When are you likely to be able to run the car? Interested in your experience's with the new diff's.
Regards
BM
I run M12 Radio and do like the idea, even if hard to prove as "better", of using same brand servo's.
To be fair. I have also ran Radiopost "Signature" servo's for some years with my M12 and never had any issue's either.
Dan. When are you likely to be able to run the car? Interested in your experience's with the new diff's.
Regards
BM