R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Nitro On-Road (https://www.rctech.net/forum/nitro-road-3/)
-   -   Wrc Gtx (https://www.rctech.net/forum/nitro-road/1040207-wrc-gtx.html)

Donte1978 04-01-2019 03:56 PM

Wrc Gtx
 
can someone please help me? I bought the Wrc Gtx kit assembled it and canít for the life of me figure out how to set up the centax clutch! Iím running Picco R1 Engine I put the clutch together per instructions and it will not engage. Any help would be greatly appreciated

1/8 IC Fan 04-01-2019 04:57 PM

Is the bell free spinning? You may need to back off the spring retainer nut a bit to find the point of engagement. Keep in mind your clutch still needs to bed in, and may need further adjustment after

Roelof 04-01-2019 11:00 PM


Rick Vessell 04-02-2019 06:40 AM


Originally Posted by Donte1978 (Post 15424113)
can someone please help me? I bought the Wrc Gtx kit assembled it and canít for the life of me figure out how to set up the centax clutch! Iím running Picco R1 Engine I put the clutch together per instructions and it will not engage. Any help would be greatly appreciated

Watch the video that Roelof posted above. Michael explains step by step the correct process for building and setting the clutch.

Roelof 04-02-2019 02:27 PM

If you have builded the clutch right with all the needed parts then the gap is set too high and/or the spring is scewed too tight.

jtrmx250 04-03-2019 11:40 PM

When i first built my gtx clutch i had screwed in the spring much to far...probably the same issue for you.

dusted 2 shoes before it clicked


All times are GMT -7. It is currently 12:47 AM.

Powered By: vBulletin v3.9.3.6
Copyright © 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.