stephen_bess

fbrk8r

iTrader: (3)

I think most people get on a FB page. I run a D817T FWIW

TruggyStyle

Hi Guys,

I want to get my Buggy a little bit lighter. Is somebody using the t-works Titanium Screw-Kit? Can you recommend them?

ASA

Ronnefalk and Stirling use them in their factory cars......

TRiN

iTrader: (2)

• HB Racing HBS109865 - HB Racing Mud Guard Set
• DE Racing DER-112-HB - Hot Bodies D815/D812 Mud Guard
• Bittydesign BDMG-HB - Clear Mud Guards for Hot Bodies D8 / D812

TrickyMick

iTrader: (13)

Hey Torrence,

Can you re-design the Caster Blocks in the next Gen Buggy so they take a bush like the hinge pin bushes, so we can adjust the Caster without having to spend an extra $200 on the 15 and 20 degree Caster Blocks?

Motorman007

iTrader: (89)

Will the Tki4 c-hubs fit? If so, it has what you want

wfo

iTrader: (6)

does anyone have a pill insert chart? I want to see what degrees i'm runnin. I believe I saw one but cant find it, thanks

roddy123

anti-squat roll center.pdf

roddy123

sorry, got a little wrong

roddy123

C MOUNT D MOUNT ANTI-SQUAT ROLL CENTER
3 DOWN 3 DOWN 2 0 HIGHEST RC
3 DOWN 2 DOWN 3 0 HIGHEST RC
3 DOWN 1 DOWN 4 0 HIGHEST RC
3 DOWN 1 UP 5 0 HIGHEST RC
3 DOWN 2 UP 6 0 HIGHEST RC
3 DOWN 3 UP 7 0 HIGHEST RC
2 DOWN 3 DOWN 1 -1
2 DOWN 2 DOWN 2 -1
2 DOWN 1 DOWN 3 -1
2 DOWN 1 UP 4 -1
2 DOWN 2 UP 5 -1
2 DOWN 3 UP 6 -1
1 DOWN 3 DOWN 0 -2
1 DOWN 2 DOWN 1 -2
1 DOWN 1 DOWN 2 -2
1 DOWN 1 UP 3 -2
1 DOWN 2 UP 4 -2
1 DOWN 3 UP 5 -2
1 UP 2 DOWN 0 -3
1 UP 1 DOWN 1 -3
1 UP 1 UP 2 -3
1 UP 2 UP 3 -3
1 UP 3 UP 4 -3
2 UP 1 DOWN 0 -4
2 UP 1 UP 1 -4
2 UP 2 UP 2 -4
2 UP 3 UP 3 -4
3 UP 1 UP 0 -5 LOWEST RC
3 UP 2 UP 1 -5 LOWEST RC
3 UP 3 UP 2 -5 LOWEST RC

smash8ight

iTrader: (8)

Making the switch to a hb.....read a lot of pages of threads on these cars.
The only question I have is,do I need a hb clutch bell only on these cars?ive read a lot on pitch but no real answers...just fyi.....its a d815,but will be updated to a 817.

brokenmoto

iTrader: (1)

If it has a stock spur gear than you can use other bells. The 0.8 pitch would need a HB bell.

smash8ight

iTrader: (8)

Thank you sir....

kmh038

iTrader: (10)

If you are using a stock HB flywheel, I am not aware of a different brand clutch bell that will work. There are several other flywheel/bell combos that you can use on the cars. I have seen the Nova and maybe a few of the Reds setups on HB cars. The TLR/Tekno setup will NOT work on the HB cars. The clutch bell will rub your fuel tank if you use the TLR/Tekno setup.