hyper 7.5 diy modifications
 

This is my hyper 7.5.
It has the engine mount and tank from hyper 9.
Carbon radio tray, front carbon brace, centre diff top plate, rear chock tower, all made by me, it has a handmade aluminium engine plate, the battery is a custom pack inside the box with the receiver.
Also inside the shocks it has custom piston with one way valves for different compression and rebound characteristics. photos of that later!
The car needs some work to mount the fuel tank in the chassis holes of the 7.5 tank, but i have figure it out so it will be ready soon.
In my plans are a carbon battery and receiver box with the rear brace attached to it, a 4 or 5 mm carbon front chock tower and carbon side guards.

This is an early design of my new radio box. When this part will finish, a mould will be created for the casting of the carbon fibre.