my4ari

iTrader: (2)

Hi everyone,

I am working on a project where I require a driveshaft of approx 120mm - 126mm in length and I am hoping some people might be able to measure the length of their front or rear driveshafts and let me know the lengths of different brands. I figure truggies will be the only cars with long enough driveshafts for this and the axles I have are from a 1/8th buggy.

Hotbodies lists theirs as 131mm but they are the only brand I can find that advertise the length.

Please help. I need the length of the bone itself and if possible, the diameter of the cv ball end. Here is a picture of the part im specifically talking about just in case anyone is confused.

Thanks heaps in advance

moto775

iTrader: (17)

Is your required length from the very ends of the shaft, or from the center of the pin to the center of the hole on the other end?

my4ari

iTrader: (2)

End to end please. Thanks

rceefreak

iTrader: (154)

Check out the ones from the xray xt8 08 spec. I just measured one from end to end and they measure 126. 26mm. I have changed my 08 to an 09 chassis and have a bunch of them just lying here. Pm me if interested

travertini

iTrader: (13)

Pretty sure the serpent s911-t rear driveshaft is 125mm !

NitroFreakManHo

iTrader: (3)

The rear centre shafts is 127mm, and front and rear CVD are 142mm according to what's etched on the shaft for Serpent 811-T