Sylvain

I want to fully lock a truggy central diff. Does a diff locker exist? I've searched the web and found nothing. I know that JB Weld or epoxy will work but I want something clean, this is why I'm looking for a diff locker.

Ruune

this works for Cen/Kyosho diff cases... dont know what application you're trying for:
http://www.cenracingdirect.com/index...ROD&ProdID=275

Jaz240

iTrader: (52)

I have heard of people using clay or silly putty to lock diffs. That way you can just pull all the clay or putty out if you ever want to unlock it.

Sylvain

That's for a RC8T diff. I'll give the Cen diff locker a try, otherwise I'll pack the diff with clay

808gx7r

that or use a VERY heavy diff oil... i think some brands can do 200-300k

truggy without centre diff would be awesome to watch expecially if power'd by MMM

Sylvain

300k will not be enough for what I plan to do

Stetler17

iTrader: (6)

For RC8 center diff locker...Use the Losi diff locker for the L8IGHT dirt oval car and put it in the Losi diff case. Use your Associated bearings, outdrives and diff gear, or a Losi gear if it is the Tooth count you want.

It will all bolt right together and right into your RC8. The bolt pattern on the Losi diff case is very slightly off from the Associated gear, but it is not a problem. It runs perfectly true because the case centers on the gear.

Less that $20 for everything. The CEN locker will not fit in the Associated diff case..I tried. Nor willl the Losi locker fit in the Associated diff case.

mc_chofo

there are 500k one, if i'm not wrong ofna and kyosho made them and don't know what other brand.