1/8th Nitro Spur Gear help
I have an RC8 and i got in my new spur gear today.....
I have replaced fluid always in my cars but never the spur in 1/8th differential How the crap do i get the spur gear off and put the new one on? If anyone has a video of this or can discribe it to me, GREAT THANKS |
remove diff from buggy, take out the 4 screws in the spur, lift the spur from the diff housing, remove the sun gear, slide the pin out of the outdrive, slide the outdrive out of old spur.
|
Originally Posted by robbieg
(Post 9103043)
remove diff from buggy, take out the 4 screws in the spur, lift the spur from the diff housing, remove the sun gear, slide the pin out of the outdrive, slide the outdrive out of old spur.
WOW, i just came off!!! thanks!!!! |
Originally Posted by DiZzYNaTiOn
(Post 9103139)
how do i remove the sun gear? w
get. a pair of needle nose and clamp on tight on the gear and ethier wiggle it around or pull up hold tight because you can cause a burr on the gear if you dont . oh yea also i fogot use a air compresser and turn the diff gear down and blow the oil out it makes it easier. |
All times are GMT -7. It is currently 06:16 PM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.