starter box glow panel
03-12-2011, 08:18 PM
#1
starter box glow panel
i have a starter box with a built in glow plug panel.. for some reason today i have plugged in 3 glow plugs and they blew straight away..anyone know what the output voltage should be? or can someone test theirs with a multimeter.. mine tests a 11v shouldnt it be something like 1.5?
cheers!
cheers!
03-12-2011, 08:50 PM
#2
No it's fine...while it shoes 11v the current draw is very very low.
What could be wrong though is the adjustment screw...could be set too high.
If there is one try turning it to (-).
What could be wrong though is the adjustment screw...could be set too high.
If there is one try turning it to (-).
03-12-2011, 08:57 PM
#3
any other reason why its is blowing the plugs?
03-12-2011, 08:59 PM
#4
You might be plugging it in to the wrong outputs. Mine has plugs to charge the battery too, if you're plugging the ignitor into those you are sending full battery power to the glow plug... And POOF goes the glow plug.
03-12-2011, 09:05 PM
#5
Nah same ports always have been in ..plus it says glow plug :->
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
