receiver packs for rc8b 2.4ghz
i am currently trying to fiqure out which would be best way to go for receiver pack with the new 2.4 system i have been out of racing for 6 years and i never had problems with the receiver pack nedding to be charged up a couple times to play with nitro! Now with the 2.4 system seems like i have to be affraid that the batteries are going to go dead does anyone else find this to be a problem or whats best receiver pack to use
|
I dont find it to be a problem, last year I used a Reedy NiMH pack and had a spare ready to swap out. This year I've switched to a Reedy LiFe, both work well but LiFe will have more run time or you could go with a LiPo but you may need a regulator unless you servos can take the extra votage of LiPo, and whatever you choose all the Reedy reciever batteries fit the RC8B ant T.
|
Get a LiFe pack. If you have been out of the hobby for 5 years. It will give you al the benefits of a lipo and you won't accidentally burn your car to the ground while trying to figure out the whole lipo deal. As far as receiver packs go I think life is going to take over.
|
thanks
life pack what type of cells are they? whats the balancer plug for? And i bought a venom pro charger will that charge life pack
|
Yes a Venom pro will charge a LiFe battery. You just need to go into preferences and change it from Lipo (3.7V) to LiFe (3.3V).
|
Life is a good option, but I still run Nimh and I haven't had any problems.
I get my practice and qualys done on one battery, change to my spare battery for the finals. I have a trackside charger, but I've only ever used it once. Changing batteries is a 2 minute job on the RC8B, so no biggy. |
Whatever one you choose you should always have a spare. With that
said you can get 2 1600mah NiMh packs for the same price as a LiFe or LiPo. So it depends as much on your budget as anything else. |
All times are GMT -7. It is currently 05:07 PM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.