R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Nitro Off-Road (https://www.rctech.net/forum/nitro-off-road-130/)
-   -   BCE chassis (https://www.rctech.net/forum/nitro-off-road/431841-bce-chassis.html)

Brian Alderman 02-09-2011 11:47 AM

.

RushDL 02-09-2011 02:40 PM


Originally Posted by Frank L (Post 8624292)
I'll be there but no more bce chassis's here. I swit he'd chassis's and haven't done much to them. But I'll be there at the nitro challenge.

Like... not getting Randy Jacksons autograph because all you have on you is a samauri sword... I had to get the mugen +5 this year.

Zuma 02-09-2011 06:42 PM


Originally Posted by Danny B (Post 8626611)
Welcome to the club. Been well over 4 months still not chassis for my truggy. Just give me my money back or something!

4 months?? Pfft... I did order mine on June 6th and still nothing... :flaming:

NITROALM 02-09-2011 11:46 PM


Originally Posted by xxxtcr (Post 8626806)
I know I probably sound like a broken record, but bill was in the hospital for close to 6 weeks prior to all this, and he's still recovering, I know he got in touch with all that have ordered and explained this, so I dont know why everyone continues to kick him while he's down.

He is one guy trying to take care of a world worth of orders for his product, there are going to be delays.

I've been helping out when and where I can, slowly he is getting caught up, eventually his products will be available to distributors.

There are going to be some big announcements very soon, so keep posted guys.

Hi Guys Again I would like to thank all of you that did send in well wishes
and very nice words regarding my Health Issue.
To bring you guys up to speed
I did receive a release to get back up and going more Hrs during the day
and Things have been really getting better. I do have a appointment
next week to see a specialist, so hopefully I will even get a better handle
on the root problem I have experienced since the surgery's,.
Regrading the older jobs as most of my guys know, I have been
trying to stay in contact with them via phone and e/m, we have also
started this year to have all of our shipments via USPS have Tracking
info sent with confirmed acceptance and updated information, just to help
keep things moving faster to get the products out to you.
As Jason stated most everybody has been very understanding and patient
with the situation, and I do very much appreciate that. It has been a very
tough road over the past Months. We will have some very good news for 011 racing
season, along with some great new products. My main focus is to get any
of the back orders filled, and all of our dealers well stocked up this year,
so ordering will be very straight forward.
If any of you have not received your product please drop me a line on our site, and I will make sure that
it gets immediate attention. Thank you all again:)

afr0sch 02-10-2011 07:18 PM

On the Way............
 
:-)

patxeik 02-19-2011 01:50 PM

i was thinking to get a bce chassis for my buggy but i dont want to wait 4 months, in 4 months i can swicht brands two times. I know that those chassis rocks but it is not worth to be waitting that long time, and also shipping costs to international customers are way toooooo high, SORRY not for me

offroad dude 02-19-2011 01:58 PM


Originally Posted by patxeik (Post 8678302)
i was thinking to get a bce chassis for my buggy but i dont want to wait 4 months, in 4 months i can swicht brands two times. I know that those chassis rocks but it is not worth to be waitting that long time, and also shipping costs to international customers are way toooooo high, SORRY not for me

I don't blame you on that. If the product is not on hand or ready, the merchant (seller) should not accept the money. I understand people get sick or ill but that didn't stop them from accepting money or sending an email say they recieved payment.

swirlvike666 02-19-2011 02:07 PM

+1 if you dont have it dont sell it

cordarrow 02-19-2011 02:47 PM

If I died tomorrow...which is never out of the realm of possibilities...my shop would continue without a hitch.

While it's admirable to 'go it alone'...I learned many years ago to invest knowledge and time into those that will see my dream through...

They may spit on my grave....but as I burn in hell I can rest assured my dream lives on and my customers remain satisfied.

And, of course, they remain to 'stack the cheese' without my slice. Everyone wins.

NITROALM 02-19-2011 05:07 PM

Hi again Guys, Things are going a lot better now. getting
all of the back order processed, and have been getting new stuff ready
for 011 new products, also have been talking with a lot of you
via Email and PM on your request :) Here are some Proto shots below
of some of the new projects... you can contact at bcespeed..com
for more info
..
Corda How have you been doing I have not seen much
of you since Truggy racers shut down How have your projects been going?
..
patxeik I know Int shipping is higher we dont make anything , in fact
each order actually cost$ with packaging and all of the extra time with
paperwork that is required for Int shipping. We do have a dealer in NZ
if that might help you can PM me for more info.

Serpent 1/8
http://i20.photobucket.com/albums/b222/rnucell/c1c.jpg
http://i20.photobucket.com/albums/b222/rnucell/cc4.jpg
Nexx8 E-Line
http://i20.photobucket.com/albums/b222/rnucell/nx3.jpg
http://i20.photobucket.com/albums/b222/rnucell/nx2.jpg
Kyoyo K9
http://i20.photobucket.com/albums/b2...ell/BCEK9a.jpg

chirivita 02-19-2011 06:58 PM

Looking good...Any plans for a DNX408 chassis? :D

xxxtcr 02-20-2011 10:20 PM


Originally Posted by xxxtcr (Post 8061287)
Bill's been pretty busy on some new projects, mainly I've been testing the new AE line of chassis, with some very good results:

http://i907.photobucket.com/albums/a...xxtcr/BCE1.jpg

The serpent will be coming soon, Lots of exciting stuff for 2011 as well.....


Originally Posted by xxxtcr (Post 8091832)
Hey guys, just got back from testing our prototype RC8B-E v2 Chassis at the Sidewinder race, Here are some pics and results.

http://i907.photobucket.com/albums/a...xtcr/photo.jpg

http://i907.photobucket.com/albums/a...2_fME8v-XL.jpg

Differences with this chassis were remarkable on the track, With alittle more length than the stock chassis, and all the unnecessary holes removed, (not to mention its still lighter than the stock chassis) The results speak for themselves. More on power traction and higher corner speeds are just to start.

Will keep you guys posted on any updates on this, They should be available soon!

Hey guys, This chassis will be available by tuesday for order, all the little kinks are worked out of it, and its ready to go, and I will also have a small stack of them available at nitro challenge for you associated guys. Please send me a Pm if you would like me to reserve one for you......

greenracing 02-21-2011 07:23 AM

I need Losi 2.0 chassis, do you guys have a timeframe to build a bunch of Losi chassis so we dosen't have to wait months??? Does absolute will carry them and when?????

xxxtcr 02-21-2011 10:23 AM


Originally Posted by greenracing (Post 8686117)
I need Losi 2.0 chassis, do you guys have a timeframe to build a bunch of Losi chassis so we dosen't have to wait months??? Does absolute will carry them and when?????

Things are moving pretty quick now that bill is almost caught up from his hospital stay, keep an eye on absolute, they will have them in stock soon, or you can order direct and he'll ship one as soon as he gets the losi batch back from anno.

schreff 02-21-2011 11:26 AM

Hey guys.

Like what already has been said, Bill is really starting to get things geared back up. I talked to him quite a few times and know what he went through and believe me, it was really really tough. I, too, went through similar health issues a year ago and it took 6+ months to really get back on my feet correctly.

I ran the first prototype Serpent S811 chassis at Motorama this past weekend and it was awesome. I finished 8th in the B main of Expert Buggy. Keep in mind, I'm more of an on-road driver and the track was super rough. The track kicked my butt, but I think I made out well considering the A main was 90% Pro Drivers.

A lot of others running the 811 are very interested in the plate as it's really a great piece of work from Bill. While it is a prototype in those photos, it's very close to a production item as Bill basically nailed it on the first attempt. Just a couple small changes to be made and it's probably going to be anodized (not sure what color yet).

I wanna thank Bill again for his hard work and time that he spent on this project and don't give up on him people. He's trying to do everything he can now to get back at full speed and get all these great new and existing items into full production. :nod:


All times are GMT -7. It is currently 12:29 AM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.