J-DUBS CUSTOM FAB SHOP (ENGING RESIZING)
02-08-2010, 07:30 PM
#1
J-DUBS CUSTOM FAB SHOP (ENGING RESIZING)
Hello all,
I just wanted to let you all know that i will be offering engine resizing for all
.21 size engines. I will be doing all work inhouse with rayaracing engine tooling. I will be offering a 2 week special. I will resize 1 P/S set per customer for free you just pay for shipping. Any additional sets will be normal price.
I will be excepting P/S sets for this offer untill feb. 22 2010. I want to let you all know also that i will be at motorama feb. 19-21 and you can give me P/S sets in person if you like. The turn around time is going to be about 2 days from recieving the P/S set. I will clean and polish P/S sets and resize with light to medium pinches for most sets witch will be what is needed usually.
I also remove and install new bearings and can do engine breakins all for additional charges. I also want to say that do to me being out of town from feb. 19-21 that will make the turn around time on P/S sets recieved around then a little longer they will not go out untill that folling wed on feb. 24 2010 thanks and i look forward to talking to you j-dub.
price list
$20 for 1st and 2nd sets
$15 for 3rd set and any after
$10 to recondition buttons
$20 to remove and install new bearings
$6.50 for 2-3 day priority shipping in the u.s
you can mail to
jerry white
960 west stop 11. rd.
indianapolis, in. 46217
you can paypal at [email protected]
you can call at (317)987-2258 leave message if i dont answer and i will call you back.
I want to say again i am using rayaracing tooling and everything is done with the highest of standards.
I just wanted to let you all know that i will be offering engine resizing for all
.21 size engines. I will be doing all work inhouse with rayaracing engine tooling. I will be offering a 2 week special. I will resize 1 P/S set per customer for free you just pay for shipping. Any additional sets will be normal price.
I will be excepting P/S sets for this offer untill feb. 22 2010. I want to let you all know also that i will be at motorama feb. 19-21 and you can give me P/S sets in person if you like. The turn around time is going to be about 2 days from recieving the P/S set. I will clean and polish P/S sets and resize with light to medium pinches for most sets witch will be what is needed usually.
I also remove and install new bearings and can do engine breakins all for additional charges. I also want to say that do to me being out of town from feb. 19-21 that will make the turn around time on P/S sets recieved around then a little longer they will not go out untill that folling wed on feb. 24 2010 thanks and i look forward to talking to you j-dub.
price list
$20 for 1st and 2nd sets
$15 for 3rd set and any after
$10 to recondition buttons
$20 to remove and install new bearings
$6.50 for 2-3 day priority shipping in the u.s
you can mail to
jerry white
960 west stop 11. rd.
indianapolis, in. 46217
you can paypal at [email protected]
you can call at (317)987-2258 leave message if i dont answer and i will call you back.
I want to say again i am using rayaracing tooling and everything is done with the highest of standards.
Last edited by J-DUB; 04-02-2010 at 07:37 AM.
02-09-2010, 03:52 PM
#2
The shop
I will be posting some pics of the new work shop and equipment that i use.
I will also post some pics of some of the p/s sets as i get them in thanks again j-dub.
I will also post some pics of some of the p/s sets as i get them in thanks again j-dub.
02-09-2010, 04:38 PM
#3
Want to wish you luck with the new venture. I know how you are, and how important is to you to make sure things are perfect.
And with Rays tooling i know you will turn out some great resizing...
And with Rays tooling i know you will turn out some great resizing...
02-09-2010, 05:42 PM
#4
tooling
thanks mark and i know you cant wait to get back home to get your p/s to me lol i just done bryce's v-spec and put alight squeeze on the grp for motorama and my worlds is ready to rock new bearings and fresh topend thanks to raya. i wasnt sure when my tooling would get here so i rushed my speed p/s to him and they both came back mon. i'm very happy with his tooling.
02-10-2010, 04:27 PM
#7
thanks
thanks for the good words guys and pinky i cant wait to LTPD with you at motorama!!!!
02-13-2010, 05:22 AM
#8
cant wait
Just gettin my stuff ready for motorama! man is this gonna be some fun racing. well i hope that you all come through and check me out at the track i will have a bluegrasshobbies banner hanging on pit area. well we are getting close just days away! i wish everyone a safe trip and thanks again j-dub.
02-13-2010, 11:53 AM
#9
I had J-DUB resize one of my speeds today and it turned out GREAT!
Idled a couple of tank's and let her rip. Absalutely top quality sizing.
I actually went to his shop (nice shop) and watched him do it, and it's a kool process.
Thanks again J-DUB for an awesome job!
Idled a couple of tank's and let her rip. Absalutely top quality sizing.
I actually went to his shop (nice shop) and watched him do it, and it's a kool process.
Thanks again J-DUB for an awesome job!
02-13-2010, 11:58 AM
#10
Just gettin my stuff ready for motorama! man is this gonna be some fun racing. well i hope that you all come through and check me out at the track i will have a bluegrasshobbies banner hanging on pit area. well we are getting close just days away! i wish everyone a safe trip and thanks again j-dub.
02-13-2010, 12:09 PM
#11
p/s sets
no prod dude! i got you covered just look me up when you get there. i will have plenty of time in between heats since i just run one class
well thanks again j-dub
02-13-2010, 12:21 PM
#12
J-DUB will have a BLUEGRASS HOBBIES banner.......will be easy to spot him.
02-13-2010, 12:35 PM
#13
yes we will have 2 10x10 eazy ups with walls (20x10 total) and i will have a big bluegrasshobbies banner on the side i will also have j-dub customs buisness cards to hand out. ignore the addy on the card but the # is correct i move my shop. thanks again j-dub
02-13-2010, 06:12 PM
#15