tony montana

iTrader: (76)

I bought a used one. Works great but I can not figure out how to reverse the servos. Also when I try to change models I cant get it to change. Meaning I can get it to go to the screen to change models for one to the other but is there enter button to change?

Integra

iTrader: (8)

the model reversing is under the menu under CH-REV.....and for the model selecting you need to select which model and press the +/- button's together at the same time...then turn the remote off then On and you will be on That model.

tony montana

iTrader: (76)

ok cool thanks alot. I have been trying to fiqure it out for a while now lol. Just this radio is much different than my ko helios

bucky1

iTrader: (1)

OK,
To reverse the servos:
Turn on,
Press the middle button in front of the display (the biggest one)
This brings up menu 1.
Go across untill you find REV
press the middle button again.
This brings up your servos
Select which one you want to revers and press either the + or - button to change it.
End button will take you back to previous screen.

Change models:
Same thing, Press middle button to get to screen 1
Go across until you find *M-SEL
Press middle button.
A list of all models you have listed wil come up
Find wich one you want.
Press and hold both the + and - buttons together for a few seconds and it will select that model.

Hope this helps.

bucky1

iTrader: (1)

Dam, Integra bet me to it.

tony montana

iTrader: (76)

one more question. How do I get the big futaba thing back up on the main screen

golferdude1971

iTrader: (18)

http://manuals.hobbico.com/fut/3pks-manual.pdf

Integra

iTrader: (8)

under system if i remember correctly.