Pin2Win

iTrader: (19)

Hey guys I have a losi 2.0 rtr buggy and I have a ofna blue (twin motor) starter box. Well the problem is I think the bump wheel is to large. its rubbing on the chassis. Only thing I can think to do is grind the chassis a little but I would rather not do that. Anybody know if the wheel on the losi rtr stater box will fit on the ofna one I have? Thanks in advance for any help!

Cyberacer

iTrader: (51)

I had to make to mods to ofna truggy box to make it work right with my 2.0T. First I had to shim the top a little higher and I had to move the wheel to center. Do those and it is perfect.

Pin2Win

iTrader: (19)

any certain shims to use? I will try it

Cyberacer

iTrader: (51)

I just put a few washers under the lid, where the top screws into the black activation arm.

Pin2Win

iTrader: (19)

Ok I will try it out. I hope it works the ofna box is way superior to the losi rtr box would like to be able to use it.

AndrewClaycomb

iTrader: (10)

I use the blue Ofna truggy box with my 2.0 RTR buggy and I don't have an issue. In fact most of the guys with 8ights around here run that box.