Did I go over the top a bit? New chassis!
#17
body and chassis is badass but im not diggin the wheels
#18
they work really well but not where he has it placed as it will actually heat the air up more as it is right next to the exhaust, it needs to be mounted on the other side of the fuel splash gaurd with a good flow of cool air to really see them work properly
#19
do you notice any diffrence with the, run time though with exhaust cooler?
now if i run a fuel filter. and the exhaust cooler, does that make the engine harder to tune?
#21
Tech Apprentice
Thread Starter
All 'red bits' are from Answer, time will tell how the last in the real world of racing.
1st time with a cooler so will have to see once I get my engine in and running. Yep will have to re-locate for better cooling
I like having the marks on the wheels as I find it helps with braking on loose surfaces, lets you see when the wheels are locked (and your skidding!).
Might have to re do them with a better design
Chassis should get seen quite a bit from the way I drive.....
1st time with a cooler so will have to see once I get my engine in and running. Yep will have to re-locate for better cooling
I like having the marks on the wheels as I find it helps with braking on loose surfaces, lets you see when the wheels are locked (and your skidding!).
Might have to re do them with a better design
Chassis should get seen quite a bit from the way I drive.....
#25
Tech Apprentice
Thread Starter
I ordered as a bare chassis with no anodizing so I could get my own done....It's all in the planning
Should be ready for the summer season.