R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Nitro Off-Road (https://www.rctech.net/forum/nitro-off-road-130/)
-   -   glitching possible cutting off help (https://www.rctech.net/forum/nitro-off-road/347747-glitching-possible-cutting-off-help.html)

dhunt488 11-29-2009 06:06 PM

glitching possible cutting off help
 
i run a losi 1.0 with 9100t and 9100s powerd by a losi 2000mah lipo with regulator through a spectrum reciever(3100) and sectrum radio(dx3s)...allright in the 2 heat races everything ran perfect ,qualefied 2nd,charged the lipo,so now running the main about 8 minutes into it it starts acting like it was glitching or power intermitting on and off...i was thinking it could be in the regulator in thinking that could i do away with the regulator ,would the receiver be able to handle that.thanx in advance..........

tc5 man 11-29-2009 06:11 PM

i would ask the electric guys about that i dont think any of us nitro guys would know post it on the electric offroad chat

mugendriver23 11-29-2009 06:33 PM

You might want to check the end of the lipo to make sure its plugged into the regulator all the way.

dhunt488 11-29-2009 06:41 PM

it is nitro.i have a os28xz.did check the plugs,was still able to finish 2nd,it was acting like it was losing power on then off every other lap,weird i would wait a second even spotter would come over then it would take off...i mean i would lose steering and throttle nothing then boom...and i do use a throttle return.....

dhunt488 11-29-2009 06:51 PM

but could i run straight lipo without reg. or will i burn up my servos and receiver?

ldawg 11-29-2009 06:59 PM


Originally Posted by dhunt488 (Post 6656207)
i run a losi 1.0 with 9100t and 9100s powerd by a losi 2000mah lipo with regulator through a spectrum reciever(3100) and sectrum radio(dx3s)...allright in the 2 heat races everything ran perfect ,qualefied 2nd,charged the lipo,so now running the main about 8 minutes into it it starts acting like it was glitching or power intermitting on and off...i was thinking it could be in the regulator in thinking that could i do away with the regulator ,would the receiver be able to handle that.thanx in advance..........

Is the 3100 rx compatible with the DX3S?

dhunt488 11-29-2009 07:15 PM


Originally Posted by ldawg (Post 6656516)
Is the 3100 rx compatible with the DX3S?

yeah your right,my bad just went out to my trailer and checked,it is the sr300..i dont think the 3000 is compatible..also checked the on off switch,wiggled it and kinda was shakky..so back to question,yall think i can do away with reg...

ldawg 11-29-2009 07:54 PM

How's the antenna? They can short fairly easy if folded.. That's what it sounds like to me, there was a bad batch of antenna on the first SR3100's with similar symptoms. I would keep the regulator although the rx can handle the voltage.

jared52 11-29-2009 07:57 PM

I'm a rookie, but I have been told the Spektrum receivers can handle 12v. However, the servos you have are not rated to handle an unregulated LiPo.


All times are GMT -7. It is currently 12:23 AM.

Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.