The Speed Shop(Birmingham, Alabama)
#46
Tech Addict
iTrader: (26)
Sounds good, if you can fit it in your schedule go for it. Will probably be this weekend before I can get down there to pick it up-you gonna be around this weekend? So your gonna service Joe's truck-hope his is not as bad as mine after the mud bowl last sat. I poured water out of my rear bulkhead sunday, may need to really check it out, not so sure I will do that again unless its a money race or something. Got to grease all the hingpins, outdrives, cvd's and all the bearings along with ring and pinions. Truck should be like new, can't wait for rc pro round 2. Yes I do run byrons. You don't have an extra set of lpr foams would you, got a special set of tires but they didn't include any foams
#49
Airtronics servos...
http://www.carolinasrc.com/Webstore/...dproduct=11697
I have ran these for maybe 45 minutes. I ran about 30 minutes with them in Dothan and about 15 this past weekend. They work awesome and are very strong and fast. I had to get them in a bind at the Wiregrass race and just gonna offer them out. I paid $110 new for them and they go from that up to about $130.
I'll take $80 each for them.
Email me at [email protected]
I have ran these for maybe 45 minutes. I ran about 30 minutes with them in Dothan and about 15 this past weekend. They work awesome and are very strong and fast. I had to get them in a bind at the Wiregrass race and just gonna offer them out. I paid $110 new for them and they go from that up to about $130.
I'll take $80 each for them.
Email me at [email protected]
#50
http://www.carolinasrc.com/Webstore/...dproduct=11697
I have ran these for maybe 45 minutes. I ran about 30 minutes with them in Dothan and about 15 this past weekend. They work awesome and are very strong and fast. I had to get them in a bind at the Wiregrass race and just gonna offer them out. I paid $110 new for them and they go from that up to about $130.
I'll take $80 each for them.
Email me at [email protected]
I have ran these for maybe 45 minutes. I ran about 30 minutes with them in Dothan and about 15 this past weekend. They work awesome and are very strong and fast. I had to get them in a bind at the Wiregrass race and just gonna offer them out. I paid $110 new for them and they go from that up to about $130.
I'll take $80 each for them.
Email me at [email protected]
#51
We are looking for one more possibly two Hudy break in stands if anyone has one they are interested in letting go for a good price. If you have any leads let me know!
Thanks!
Jason, maybe you can stop by the shop over the weekend, bring your stuff and lets just put the engine in your car Let me know
Thanks!
Jason, maybe you can stop by the shop over the weekend, bring your stuff and lets just put the engine in your car Let me know
#52
RC PRO SERIES round #2 @ Nitro Fever...
--------------------------------------------------------------------------------
Hey guys,
I'll be placing a tire/rim order on monday. If you are interested in having us glue you some tires for the rc pro race send me a email to [email protected], let us know what tires, rims, color, and compound. I'll have them for you at the event.
I got several orders so don't wait until the last minute
--------------------------------------------------------------------------------
Hey guys,
I'll be placing a tire/rim order on monday. If you are interested in having us glue you some tires for the rc pro race send me a email to [email protected], let us know what tires, rims, color, and compound. I'll have them for you at the event.
I got several orders so don't wait until the last minute
#56
Tech Addict
iTrader: (26)
Just in time to follow me around the track again-couldn't resist I tried. Alan u think dave will make it this weekend, lookin forward to some good racing. May try to swing by tuesday or wednesday evening if that's ok-lets get a group together to wrench and hangout and maybe even bbq. Hold me a spot in the losi compound for the weekend, got a generator if u think we may need it for the rc pro race. Holler later gotta get to work
#57
Tech Elite
iTrader: (61)
Here is my losi 2.0T in Action at the 2009 Wiregrass Indoor Nationals. Jared Tebo, Billy Easton, Greg Degani, and Ryan Lutz along with all the region fast guys showede up for a shot at the large cash payouts.
I'm in third behind tebo, and lutz for most of this clip. Truck was fast!
http://www.youtube.com/watch?v=hl_2e...e=channel_page
I'm in third behind tebo, and lutz for most of this clip. Truck was fast!
http://www.youtube.com/watch?v=hl_2e...e=channel_page
I had been racing for about a year before i started using the speed shop services. I could work on my buggy just as good as the next guy so I thought. Alan took my old buggy and went trought it and did a rebuild the way it should be and wow I realized I didnt know squat about set up. It is amazing how much a few minor tweeks here and there add up in the end. I used to spend hours at the track working on my buggy before, now I cange tires and charge the battery and race. It made the whole racing experience much more fun and realxing.
not shane keller sorry had to
Sounds good, if you can fit it in your schedule go for it. Will probably be this weekend before I can get down there to pick it up-you gonna be around this weekend? So your gonna service Joe's truck-hope his is not as bad as mine after the mud bowl last sat. I poured water out of my rear bulkhead sunday, may need to really check it out, not so sure I will do that again unless its a money race or something. Got to grease all the hingpins, outdrives, cvd's and all the bearings along with ring and pinions. Truck should be like new, can't wait for rc pro round 2. Yes I do run byrons. You don't have an extra set of lpr foams would you, got a special set of tires but they didn't include any foams
this thread should ne called the tool-shed good luck buddy sounds like your off to a good start
#58
alright cool ill pick it up today.. i let you guys know how it runs after the race this weekend
#59
Bmoney, cool...
Shady, sounds good just give me a ring.
I'm headed out to do some wrenching now Yesterday I pretty much had a full shop with about 12 buggies/truggies. Gonna break in a couple engines today.
Cookie, let me know when you want me to pinch that sleeve and measure the crank and rod on the grp.
Shady, sounds good just give me a ring.
I'm headed out to do some wrenching now Yesterday I pretty much had a full shop with about 12 buggies/truggies. Gonna break in a couple engines today.
Cookie, let me know when you want me to pinch that sleeve and measure the crank and rod on the grp.