I have this servo, but it's weak and...
#1
I have this servo, but it's weak and...
it says that it's a high torque servo and it's really not. It's not even strong enough to turn the wheels. Anyone know of one, that's not very much money that would be powerful?
#2
whats not much money?
when i started racing, i had great luck with these, S3305, 35$ and as good as any 50-60$ servo i have used, but a bit slow
http://www.amainhobbies.com/product_...ducts_id/28056
the next step i think would be ace1313 73$
http://www.amainhobbies.com/product_...oducts_id/5994
when i started racing, i had great luck with these, S3305, 35$ and as good as any 50-60$ servo i have used, but a bit slow
http://www.amainhobbies.com/product_...ducts_id/28056
the next step i think would be ace1313 73$
http://www.amainhobbies.com/product_...oducts_id/5994
Last edited by BAUSTIN; 01-30-2009 at 06:32 PM.
#3
Not over $65.
#4
only 8 more$, that is the most popular servo on a-main.....
#5
Tech Fanatic
iTrader: (14)
Well worth it, you also might want to take a look at this beast
http://www3.towerhobbies.com/cgi-bin...?&I=LXPHD6&P=7
You should be able to get it down around $80 if you search online for some tower hobbies coupons.
333 oz-in .15
You'll have no problems getting the wheels to turn with this one
This one should be better than what you have and is only $48
http://www3.towerhobbies.com/cgi-bin...?&I=LXPHD5&P=7
might be a little weak for competitive racing though.
Keep your eye out in the FS forum I picked up 3 Airtronics 94359's (200 oz-in .10) for $100 shipped
http://www3.towerhobbies.com/cgi-bin...?&I=LXPHD6&P=7
You should be able to get it down around $80 if you search online for some tower hobbies coupons.
333 oz-in .15
You'll have no problems getting the wheels to turn with this one
This one should be better than what you have and is only $48
http://www3.towerhobbies.com/cgi-bin...?&I=LXPHD5&P=7
might be a little weak for competitive racing though.
Keep your eye out in the FS forum I picked up 3 Airtronics 94359's (200 oz-in .10) for $100 shipped
#6
hand down buddy you get what you pay for.. you didnt say what its going in but i put the hitec 5955 or now im running the hitec 7955 high torques in my stuff...there isnt anything it turn and its fast..
dont slack on servos and just step up and pay the extra money as its well worth it to a certain point
dont slack on servos and just step up and pay the extra money as its well worth it to a certain point
#7
I'm putting it in a Hellfire. I know you guys hate them, but that's what I have and it needs a new servo. So, I need to know what to get it...
#8
The servo that's on it, is a TowerPro MG995.
#9
Tech Fanatic
iTrader: (14)
With the MT you're going to need something strong, I'd get the Tower TS170 I linked you to earlier, it's a rebaged OEM'd Hitech HS-7955TG. Titanium Gears, and 333 oz-in it should last you forever. Don't skimp on the steering servo. You can go a little cheaper on the throttle/brake.
#10
#11
#13
#15
Tech Adept