Hyper 9 Kits in Stock!
#1576
Tech Apprentice
When I got my hyper9 gl I hated it. the back end kept washing out and the car would loop out from any well landed jump or random little bump. I think its the only rc car I ever picked up and threw in frustration.
the problem was the back shocks and swaybars. the back swaybar on my gl was crazy thick. I went with the stock one from the original hyper9( dont remember the size). also, the back shocks had a ridiculous amount of rebound so I took the smallest size drill bit I had and made 2 shock piston holes in each shock bigger and replaced the springs with some 808 silver springs I had lying around. now the car is dialed. my hyper9 gl is about 6 months old so I do not know if they have changed any of this stuff but you might want to observe if your car has these traits and make changes as necessary. I know this isnt what you asked, but my hyper9 gl (and my brothers) came with horible handling traits so I thought I would give you a heads up. as for breakage I would carry some upper and lower front arms and hubs.
someone else might be able to give you the exact sizes for shock pistons/ springs/ rear swaybar.
the problem was the back shocks and swaybars. the back swaybar on my gl was crazy thick. I went with the stock one from the original hyper9( dont remember the size). also, the back shocks had a ridiculous amount of rebound so I took the smallest size drill bit I had and made 2 shock piston holes in each shock bigger and replaced the springs with some 808 silver springs I had lying around. now the car is dialed. my hyper9 gl is about 6 months old so I do not know if they have changed any of this stuff but you might want to observe if your car has these traits and make changes as necessary. I know this isnt what you asked, but my hyper9 gl (and my brothers) came with horible handling traits so I thought I would give you a heads up. as for breakage I would carry some upper and lower front arms and hubs.
someone else might be able to give you the exact sizes for shock pistons/ springs/ rear swaybar.
#1577
Registered User
iTrader: (8)
MoosRacing carbonfibre chassis and parts.
Hey guys if your after a carbonfibre chassis for your hyper 9 visit http://www.moosracing.dk/ or email [email protected]
Here is the product forum with a review and more to come and also pictures.
http://www.rctech.net/forum/racing-f...sis-parts.html
The picture is of one of the chassis that have been done.
Here is the product forum with a review and more to come and also pictures.
http://www.rctech.net/forum/racing-f...sis-parts.html
The picture is of one of the chassis that have been done.
#1580
Clutch Bell shimming and alignment?
Is there another way to move the motor forward and backward to properly align the clutch bell with the center diff? besides shimming the clutch bell to move forward and backward?
Last edited by diamonddawg21; 07-28-2010 at 01:22 PM. Reason: spelling
#1581
The JL flywheel will give you the proper gear position on the clutch bell.10106 the flywheel is thinner, but get a shim kit to get the best fit.
#1582
Ok, here are some pics with the new items that are comming soon.
#1583
What are the new items in those 4 pictures? I see tires and radio box. Anything else?
#1586
Hey Guys
I have a hyper 9 GL for sale with 4 tanks of fuel through it.
comes with the straight rear arms and the stock ones and a set of extra arms and white and blue springs, 2 set of engine mounts both 20 degrees and I am sure some other small stuff. I figured I would post it here before the for sale forum or e bay.
I will only ship within the lower 48.
oh yeah and it has the spider diffs in it and big bores. both wing mounts..ect
460.00 shipped
email me for pics if you want them
I have a hyper 9 GL for sale with 4 tanks of fuel through it.
comes with the straight rear arms and the stock ones and a set of extra arms and white and blue springs, 2 set of engine mounts both 20 degrees and I am sure some other small stuff. I figured I would post it here before the for sale forum or e bay.
I will only ship within the lower 48.
oh yeah and it has the spider diffs in it and big bores. both wing mounts..ect
460.00 shipped
email me for pics if you want them
#1587
From the pics it's a new box that will be a running change, so now you won't have to crack open the box all the time, just two screws on a hinge and if you have a transponder that is not cut like mine was it can be intergrated on the top portion of the box, the are screw holes to keep it in place. The tire is from Hobao, and after Saturdays running at Rev with about an hour, I can say the tires are awsome with outstanding wear they still look new. I had brand new Subculters and didn't even got close to my tire bag. I will use them again at the Monster series at Rev this Sat. There's still one more thing that's with the car but can't say till they aprove it, but they are just as good as the other manufactures.
#1588
Also the fuel cooler, we've had it since April but not sure if peeps are aware that we had one.
#1589
the back end of my Hyper 9 2.0 is bucking up really badly over the jumps and other obstacles....any advice ?
#1590
X-ray silver springs, they have made the car over the bumps alot better, I did some drilling on my pistons but I can't remember right now but I had those pistons drilled out when I had the stock springs and was still bucky, but with the spring change it's a whole lot better drive.