I have a King Headz extended motor mount in my 8B 1.0. Will it fit in the 8T 2.0?

yes. :nod:

will the mud guards from the original 8t fit on the 2.0

No they will not.

do they have new mud guards avaliable for the 2.0

Not yett...make your own outta lexan. :nod:

you can trace the old one onto a piece of lexan then just extend it.

I used the origional mudguards and with a bit of mucking around they fit but you have to cut them down a lot as the new style body hits the top of them easily...I also took a bit out of the body where they were hitting and on race day they were still getting hit on the top so took a bit more out of the body.

I noticed the headlights sticker on my 8T 2.0 body says NITROLINER in the middle.. odd. ;)

New truck.. awesome lid.. aka tires with the sharpie touch :D

I use the King Headz extended motor mount in my 2.0 and works just fine.

Depends on what type of anodizing. Parts with hard coat can be up to .002 bigger ( od) , smaller ( id) .

The body has a vage resemblance to the Freightliner Aerodine:lol:

not to bring up old subjects,but at least losi was consistent.i pulled out the shock ends and broke the upper servo saver.neither where hard crashes.hub bearings are ok,but i changed them to avids before i ran.

new 8t
 

looking for some help on set up for the 8t im coming from a cen with bce conversion and want a good starting point on setup for a hardpacked med track alot of big and small jumps