need help please
i just got a used nitro rustler from a friend and was wanting to put a new engine on it. it still has the stock trx 2.5. i was wanting to get at least a .26 or .28 but im not sure what will drop in with little modifications. What engines would be compatible and what else would i have to do?
|
I doubt you can go from a .15 to a .28......i bet a .18 is the biggest thing that will fit in it, i think the 3.3
|
Your rustler can only take .12 to .18 engines . Although there is a kit [don`t remember who makes it] to put big block engines in the truck . But it is stupid fast with the conversion kit . Look for a nice .12 or .15 engine .
|
Originally Posted by Briguy
(Post 4970903)
Your rustler can only take .12 to .18 engines . Although there is a kit [don`t remember who makes it] to put big block engines in the truck . But it is stupid fast with the conversion kit . Look for a nice .12 or .15 engine .
What is the outcome you're hoping for by having a bigger engine? |
Originally Posted by Briguy
(Post 4970903)
Your rustler can only take .12 to .18 engines . Although there is a kit [don`t remember who makes it] to put big block engines in the truck . But it is stupid fast with the conversion kit . Look for a nice .12 or .15 engine .
|
Is there anything wrong with the 2.5 engine that's in the truck?
If not I would leave it and run it. A well tuned 2.5 in a rustler is going to outrun most any big block .28 anyways in that light truck. All a big block will accomplish is more torque and weight and most likely a bunch less rpms as well as a bunch of parts breakage due to the added torque on tap at low rpms. I have owned a nitro ruslter 2.5 and it was pretty darn insane with the stock 2.5 in it with a good tune. I would keep the 2.5 if it's in good shape. If it's worn out consider picking up a new traxxas 3.3 for the truck as everything that's on the 2.5 will bolt right on the 3.3 such as flywheel and clutch setup and exhaust.......:nod: |
i guess the .28 or .26 would be a little extreme...the 2.5 has been ran hard and it doesnt seem to want to run right, the main reason i want to switch engines is to out preform the jato with the 3.3. new alluminum parts is a given so everything doesnt break.
|
i would be put a good .18 in there.. i am sure that would do the trick for ya
|
A high performance .12 engine will blow away a .18 .
|
Originally Posted by Briguy
(Post 4971230)
A high performance .12 engine will blow away a .18 .
|
I'd put an OS Tg in it
it's a .12 and great race engine, if your gonna race |
All times are GMT -7. It is currently 03:49 PM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.