Turning is really slow...
 

Okay so I have a Jammin X1-CR RTR buggy and the turning is really slow and it doesn't turn sharp to the right.
I believe it is my steering servo.
Is there any way to fix this or do I need to buy new stuff?

Ideas on the cheapest things to buy to fix it? - I don't want to spend $200 on some fancy radio or anything.

Thanks!

I'm pretty sure all you will need to do is get a better servo. RTR servos are always crappy, so invest in a nice one in the beginning. Look for one that has at least 120oz/in of torque, but the more the better. Around 200oz/in is probably the best for a buggy.

Definately try to get one over 180oz for buggy. You'll enjoy it more ;)

Ace 1313 will fix all your problems, you can purchase one for about $70, 175 ounces of torque ( If i remember correct that is right) and probably faster than you want if you are a newb, but you will get used to it.

A new servo will help a lot . But if you don`t have a good setup a new servo won`t do much .

So all I would need would be a new steering servo?
No need for new radios or anything?

yes, all you need is a new steering servo.

I just bought a JR9100T, it was 120$ but its power in awesome, and JR offers a 3 year warranty!!! how can you go wrong with that? for 120$ you will basically never buy another steering servo again.

you wont need a new radio or receiver, just unplug your wrecked servo and plug the new one in. (remember: the black cable goes on the right side when plugging it into the receiver)

Lean it out, 1/8 of a turn a time, that should speed things up!!

I dont get it...

you do know he put turning and not tuning, right?

does the radio you using have EPA adjustments?

EPA doesnt have anything to do with the speed of his servo, does it?

Yeah id say its to rich....

get urself i hitec 5955 of a 7955(i belive) and ull be set

I'm a newb and i had the same problem. ofna rtr servos are made low torque
with plastic gears. Ibought a HITECH STEAL GEAR #hs-645mg from tower hobbies for around $45 and it works great. if you have it spend it on a better one, but this one does the job

no it doesnt but it will make a big diffrence when heb blows up the new servo from it having too much strain on it. he needs a radio with epa to help the servo last longer