TQ Racing SX8
#721
Hi All,
Are any of you having trouble with Lower King Pin Screw (the 4 x 16 screw for the C-Hub). I have not been able to complete a race as yet. The screw just pops out, even after applying a lot of locktitie.
Any help will be greatly appreciated. Thank you for your help.
Are any of you having trouble with Lower King Pin Screw (the 4 x 16 screw for the C-Hub). I have not been able to complete a race as yet. The screw just pops out, even after applying a lot of locktitie.
Any help will be greatly appreciated. Thank you for your help.
#722
Jesussaves: I had the same issue for a little, what i did was take the whole knuckle out and clean out the inserts with rubbing alcohol along with the screw and clean them up. i then reassembled them with blue loctite on the screw and since then i haven't had any issues. You can give it a try. just maybe the loctite isn't hearing to the surface?
This Saturday is our start of the Arizona Winter Series and i've gone over the buggy and i am very happy with the wear on it and cant wait to see how it does this weekend at The Nitro Pit. I must have a little over Four gallons now on the chassis and the only wear spot is in the rear witch is normal. Cant wait to get another gallon or so out of it and see how thin i can make it haha.
This Saturday is our start of the Arizona Winter Series and i've gone over the buggy and i am very happy with the wear on it and cant wait to see how it does this weekend at The Nitro Pit. I must have a little over Four gallons now on the chassis and the only wear spot is in the rear witch is normal. Cant wait to get another gallon or so out of it and see how thin i can make it haha.
#724
Tech Fanatic
Thanks Will!
I TQed by 30 seconds and had engine probs in the main. RRRR
I think that I over did the air filter for the main and it made the engine run lean on top.
Car was awsome all day and there are a bunch of people that want SX8,s here now.
I TQed by 30 seconds and had engine probs in the main. RRRR
I think that I over did the air filter for the main and it made the engine run lean on top.
Car was awsome all day and there are a bunch of people that want SX8,s here now.
#725
Tech Elite
iTrader: (24)
30 seconds? Jeez B, you should have came down and ran with us Most of the amain at the SIC showed up to battle it again. IT was crazy
Long drive for you though. When/if dan get's the xtreme back going with a good flow of entries I'll be back to race. It looks like a great place. He used to have 100-150 at that race.
But hey....if you got any of those guys wanting a rig(SX8) check this out:
http://www.carolinasrc.com/Webstore/...dproduct=10695
If ordered today, another 10% off! So about $385! I just got a couple things ordered up
Will, not you! lol...
Long drive for you though. When/if dan get's the xtreme back going with a good flow of entries I'll be back to race. It looks like a great place. He used to have 100-150 at that race.
But hey....if you got any of those guys wanting a rig(SX8) check this out:
http://www.carolinasrc.com/Webstore/...dproduct=10695
If ordered today, another 10% off! So about $385! I just got a couple things ordered up
Will, not you! lol...
#726
Tech Fanatic
Awsome run by you at the Snake pit as well.
I heard there is a race the 15th at Nitro Fever, is that so?
I heard there is a race the 15th at Nitro Fever, is that so?
#728
Tech Master
iTrader: (33)
What do you mean not me? ......
I know what you are talking about Alan but 2 servos in back to back weekends and one cost me the main. It's not looking good.
Well it's going to be hard to get his race back to that level when other races are scheduled over his and with all the tracks that are in Bama now everyone is staying close to home.
I know what you are talking about Alan but 2 servos in back to back weekends and one cost me the main. It's not looking good.
Well it's going to be hard to get his race back to that level when other races are scheduled over his and with all the tracks that are in Bama now everyone is staying close to home.
#730
Great job Brian,maybe we will be able to help with the motor issues soon
Alan thanks for the continued work at Carolinas we are here if you need any thing.
Racers there are many stores carrying our products if you need direction just drop us a email.
Thanks
Alan thanks for the continued work at Carolinas we are here if you need any thing.
Racers there are many stores carrying our products if you need direction just drop us a email.
Thanks
#734
Tech Fanatic
I hope all the new goodies are ready before X-Mas.