New XRAY 808
04-25-2008, 08:00 PM
#586
If the body has enough room for it, Maybe install throttle link on top of the servo arm. And adjust throttle slide arm up .As always we will see
04-25-2008, 11:02 PM
#587
Tech Addict
Fix
Shaving the top plate is a known Losi trick to solve the same issue. However the Losi has even less clearance so you really have to cut that top plate back. On this one it looks like a quick smooth back with the Dremel would insure safe operation. No biggy...
04-26-2008, 07:59 AM
#588
Close to zero. Have not put it on the set-up system to check toe though but visiually it looks to just ever so slightly toe-in a degree when the suspension bottoms out. Equally same at neutral & full lock either way. That happens about the last 1/4" of suspension travel - @ all the rest of suspenion travel it is zero bump (visually "messured"). Thats with the manual-spec 3 mm bump-spacers.
04-26-2008, 08:12 AM
#589
Whats your point by saying it is a Losi Trick??
04-26-2008, 08:21 AM
#590
Tech Adept
Thanks for the reply Niklas. Mine should be here soon. Can't wait.
04-26-2008, 08:25 AM
#592
04-26-2008, 11:55 AM
#594
Fuel tubes. The filter is not included in the kit. I think it will work and its nice if one can keep the tubes away from the pipe also... 
04-26-2008, 11:59 AM
#595
Some almost ready pics of BoB with all clothes on.
04-26-2008, 12:01 PM
#596
And a couple more... 
04-26-2008, 06:42 PM
#597
Tech Rookie
Looks real nice , like a wasp ready to attack! it just looks fast! Ron
04-27-2008, 08:59 AM
#599
By the looks of the throttle linkage in detail now, it looks like the ball head is very close to the center diff plate. I'm curious if under normal chassis flex conditions if the ball could/would bind against the top plate? Especially where the plate comes to that mild point. Looks like there's maybe a 1/8" gap. Maybe advantageous to file the plate flat, so there is a little more room for clearance. I guess time will tell.
Just an observation....
Just an observation....
04-27-2008, 09:01 AM
#600
I was very please when I built my production car, everything fit together PERFECTLY, you didn't have to halfway shave down the suspension spacer clips like the TQ and EC, it was GREAT!
Would have raced it and given some feedback on my production kit, but my brand new radio system has some 'bugs'...