antone

iTrader: (2)

Thanks guys for the many replies back about ocm this makes me much more comfortable knowing that this is not only a great buggy but also a great company that stands behind there products. Thats what matters the most to me.

skeller

iTrader: (11)

Glad we could help....that's what we're here for.

DPowers

iTrader: (86)

anytime.

lance

any problems with ocm wheels shattering?one shattered plowed into mogule rythm section also broke steering arm.new tires whats the best way to remove tire from rim?Thanks Lance

DPowers

iTrader: (86)

i cracked a set of the rims to but it was just a small crack, but you boil the tire to break the clue loose but i have of others ways of getting the tire off the rim.

skeller

iTrader: (11)

The first run kit wheels had some breakage problems...it wasn't every set in every kit, just random reports of some wheels breaking. I have 2 sets of first run wheels that have done me fine. The wheels in current kits are fine.



For tire removal...it's just a matter of preference. Some use acetone, some bake'em in the oven. The oven bake method seem to sound alot easier...I've never done it personally so I won't even begin to describe it.


Somebody tell this man how to bake your tires off.

lance

skeller thanks for quick response.tried bake method.My wife wouldn't let me use oven so my alternative was(set them close to electric space heater on top of empty pop can for about 4 minutes came right off. turned tire to other side did same thing no mess or smell)gets alittle hot when peeling tire back so use some gloves.

skeller

iTrader: (11)

That's what we're here for.

Glad you could save your tires.

ABURTON

iTrader: (24)

Lance,

Shoot me a email wth everthing I need and I'll shoot ya some of our new dish wheels. We had some random issues but everything should be solid on the dish wheels.

Antone...check out amain on the kits. If you get the monthly coupons from them you can grab it up for a steal!

antone

iTrader: (2)

Thanks Alan for the heads up about amain

MaxxBashers

iTrader: (110)

Any idea when the new kits will be out with all the goodies? Anyone going to the Nitro Challenge?

lance

Whoa; hows that? Head of company support responds to forum post in two hrs to resolve an issue. Un heard of!! Any other company I'll bet not!!!!

nik77356

iTrader: (6)

Cause Alan's just awesome like that!

BermyDomRepRC

iTrader: (26)

Hey guys I will be repping OCM down here inthe Carribbean i want to say thanks to Alan for giving me the chance to race for the team i likew that a lot of regulars guys race them and the support on the forums is great.
With that said i need a basic starting point setup please guys and ps if you any of you guys find yourself in the Dominican Republic hit me up

DPowers

iTrader: (86)

let me be one of many to welcome you to the team, and if you look back a few you will find a few different setups to start with..

but the car is great and you will find the support you will get is second to none, and AB and the rest of the team are always willing to leand a helping hand.