OCM KAOS DOMINATING
11-04-2009, 10:29 AM
#2236
Tech Addict
ok
I actually have had all 3 at the same time and tried swapping parts with my own hands is why I said what I did. So besides the looks which everyone goes by I KNOW what will fit and what will not. So say what you want. Go to the X-ray thread and call them all "Losi 808" Drivers and while your at it go to the Odonnels thread and call them "Kyosho Z01-B" drivers too.
I actually have had all 3 at the same time and tried swapping parts with my own hands is why I said what I did. So besides the looks which everyone goes by I KNOW what will fit and what will not. So say what you want. Go to the X-ray thread and call them all "Losi 808" Drivers and while your at it go to the Odonnels thread and call them "Kyosho Z01-B" drivers too.
11-04-2009, 04:05 PM
#2237
Tech Addict
iTrader: (36)
There aren't a lot of parts available in the US anymore. Right now, Holeshothobbies.com has parts and there is a seller on ebay that has quite a few listed. OCM indicated late last year they had intentions of a continued presence in the US market but that hasn't materialized. I don't know where that effort stands at the moment.
Please heed the words of Vnmsgt and Speedy2 regarding interchangeability of parts with a "particular buggy" that looks very similar. They have actual in-depth, hands-on experience with OCM and know what they are talking about. Just read through this topic and you will see the multiple contributions they have made.
Please heed the words of Vnmsgt and Speedy2 regarding interchangeability of parts with a "particular buggy" that looks very similar. They have actual in-depth, hands-on experience with OCM and know what they are talking about. Just read through this topic and you will see the multiple contributions they have made.
11-05-2009, 12:29 AM
#2238
ok the ocm is a mugen copy than... but also a much nicer one with his own behavior ..
again I have a O'Donnell
and really nothing reminds my off a Kyosho
unless the way the MKI drives possibly
again I have a O'Donnell
and really nothing reminds my off a Kyosho
unless the way the MKI drives possibly
Last edited by speedy2; 11-13-2018 at 10:55 AM.
11-16-2009, 06:51 AM
#2241
a OCM is very different to a MBX5 certainly the evo version
in fact, only the lower front arms look alike..
and you can mount the upper arms
but then the geometry is all different
and the ocm isn't driving as good anymore
many rods and the diff outdrives are much bigger
so you can't mount the mugen ones
and there is the toeplates with inserts that makes it
the most tunable buggy ever
it is really a buggy on it's own and a good and beautiful one..
in fact, only the lower front arms look alike..
and you can mount the upper arms
but then the geometry is all different
and the ocm isn't driving as good anymore
many rods and the diff outdrives are much bigger
so you can't mount the mugen ones
and there is the toeplates with inserts that makes it
the most tunable buggy ever
it is really a buggy on it's own and a good and beautiful one..
OCM will re-start coming soon.
11-20-2009, 09:59 PM
#2242
i have lot of spare parts who need?
if possible my company can solve spare part request problem.
some EVO. designed will be create as soon.
regards
max
if possible my company can solve spare part request problem.
some EVO. designed will be create as soon.
regards
max
11-21-2009, 01:28 AM
#2243
what does he mean ??
Last edited by speedy2; 11-21-2009 at 06:22 AM.
11-21-2009, 04:54 AM
#2244
Tech Addict
There is no doubt that ocm will be bringing out a new car in the near future.
How good it will be will depend heavily on the owner/designers attention to detail and how commited they are in listening to what customers needs are.
It may be under a different name or they may just release it as a dt 20.
Unfortunately though my trust in them doing the above is zero. However I do wish them the best of luck and if they do pull it off, I will be the 1st to congratulate them.
How good it will be will depend heavily on the owner/designers attention to detail and how commited they are in listening to what customers needs are.
It may be under a different name or they may just release it as a dt 20.
Unfortunately though my trust in them doing the above is zero. However I do wish them the best of luck and if they do pull it off, I will be the 1st to congratulate them.
11-22-2009, 05:26 PM
#2245
There is no doubt that ocm will be bringing out a new car in the near future.
How good it will be will depend heavily on the owner/designers attention to detail and how commited they are in listening to what customers needs are.
It may be under a different name or they may just release it as a dt 20.
Unfortunately though my trust in them doing the above is zero. However I do wish them the best of luck and if they do pull it off, I will be the 1st to congratulate them.
How good it will be will depend heavily on the owner/designers attention to detail and how commited they are in listening to what customers needs are.
It may be under a different name or they may just release it as a dt 20.
Unfortunately though my trust in them doing the above is zero. However I do wish them the best of luck and if they do pull it off, I will be the 1st to congratulate them.
12-21-2009, 12:58 AM
#2246
I just hope they don't go for the stupid 808 transmission on the new buggy
that would be desaster even before started...
Delavuada GP Spain
Javi Pombo wins 2 round ahead of runner-up
A-Main results
1st - JAVI POMBO OCM Evo / ALPHA / RCW / SAVOX / JETS
2nd - GONZALO MORALES XRAY 808 / SIIM
3rd - JAVIER CASARES ASSOCIATED / NOVAROSSI
that would be desaster even before started...
Delavuada GP Spain
Javi Pombo wins 2 round ahead of runner-up
A-Main results
1st - JAVI POMBO OCM Evo / ALPHA / RCW / SAVOX / JETS
2nd - GONZALO MORALES XRAY 808 / SIIM
3rd - JAVIER CASARES ASSOCIATED / NOVAROSSI
Last edited by speedy2; 09-10-2010 at 02:41 AM.
01-06-2010, 04:36 AM
#2247
pictures of the new INTECH BR-5 buggy
Last edited by speedy2; 07-03-2010 at 02:42 AM.
01-07-2010, 06:06 AM
#2248
Tech Rookie
OCM is coming back?
01-21-2010, 12:04 PM
#2249
Perhaps as a private label manufacturer.
I wish I could find a chassis for my dt19 truggy. With hong nor shocks that thing dominated every race I've ever put it in. I just hardly ever ran it since there was no parts support.
I wish I could find a chassis for my dt19 truggy. With hong nor shocks that thing dominated every race I've ever put it in. I just hardly ever ran it since there was no parts support.
01-21-2010, 03:59 PM
#2250
theres an ocm truggy on ebay now 18 hrs left