R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Nitro Off-Road (https://www.rctech.net/forum/nitro-off-road-130/)
-   -   Steering Problem (https://www.rctech.net/forum/nitro-off-road/170053-steering-problem.html)

jmdv 06-27-2007 11:27 AM

Steering Problem
 
My steering is fine at slow speeds with the steering trim but at high speeds it tends to swerve one way. Any, help?

pete8541 06-27-2007 12:18 PM

what are you driving?
where are you running it?

jmdv 06-27-2007 01:01 PM

im runing a nitro rustler on like hard packed tracks with some sand

R40Victim 06-27-2007 02:00 PM

Check to make sure your linkage and servo are ok, and your servo saver is tight enough. It may just be inherent to that truck.

jmdv 06-27-2007 02:06 PM

k, ill check that, thanks

WayzOfTheCore 06-27-2007 04:09 PM

would the cars balance have any affect on this? under hard acceleration, my car would tend to swerve to 1 side as well until i balanced it out.

jmdv 06-27-2007 07:00 PM

and how do i balance it?

WayzOfTheCore 06-28-2007 03:46 AM

find out which side is lighter and then even it up by adding weight. ive only balanced my onroads up but to do it i balanced the car on 4 springs under the chassis and added weight to 1 side until the springs on the left and right were compressed evenly. not sure if that method will work for you as your rustler is probably alot heavier than a 1.10 onroad

jmdv 06-28-2007 07:23 AM

k i will give that a try, thanks


All times are GMT -7. It is currently 01:51 PM.

Powered By: vBulletin v3.9.3.4
Content © 2001-2011 RCTech.net