Need Help With My Electric Truggy Conversion!
 

Going to be converting my CEN Arena TR/FR truggy for electric racing this year. I have some question - any help would be greatly appreciated!

1) Who makes or sell a a motor mount for the electric motor - or one that I can rework for my CEN?
2) Clutch bells 13tooth 14tooth and 15tooth for the electric motor?
3) Recommended Motor - Lehner? Hacker?
4) speedo suggestion?
3) Lipo Suggestion

thanks everyone :nod::nod:

for the motor mount check rc-monster.com they may have one that'll work or that you may mod to work, as far as clutch bells just get a pinion gear you can always get those on rc-monster as well..just e-mai mike the owner he'll help you out...for the motor check out the feigao line of motors i had a revo which is heavier than a truggy and had a feigao 8xl which makes tremedous power on 6s lipos' basically two 3s's wired together...lipo's will help you save weight and give you good power..i ran maxamps lipo's but look up trak power or apogee or other companies..for your lipo's

Thanks for the info - greatly appreciated - what diff oils is every running for a starting point? High traction - medium sized track!

www.rc-monster.com is the place to go for electric conversions. :nod:

Just get the mamba monster and be done with it. The 2650kv motor because that truggy is heavy I had 1. And you will need to run between 4-6 S lipos.

no the 2650kv is a buggy motor doesnt have the tourqe just speed but the 2200kv on 4s or 5s is good the losi 8ight conversion works on this car